Word document formatting for a thesis: the full setup
Good Word document formatting for a thesis or dissertation comes down to two habits: format with styles, never by hand, and set things up in the right order. Page first, then the Normal style for body text, then heading styles, then sections and page numbers, and only then the contents, captions and cross-references that Word builds from them. Set up like this, a 200-page document stays consistent however often you edit it.
- Set the margins first: Layout › Margins › Custom Margins.
- Put the body font, size, spacing and indent in the Normal style: on the Home tab, right-click Normal in the Styles gallery and choose Modify.
- Give chapters Heading 1, sections Heading 2 and subsections Heading 3, and number them with Home › Multilevel List.
- Insert Layout › Breaks › Next Page before Chapter 1, so the front matter can have roman page numbers and the chapters arabic ones.
- Let Word build the contents, captions and cross-references, update them all (select everything with Ctrl+A, or Cmd+A on a Mac, then press F9), and save the setup as a template.
01The order for formatting a thesis in Word
Format a thesis in Word from the bottom up: page and margins, then the Normal style, then heading styles, other styles and section breaks, and finally the contents, captions and cross-references Word generates from them. Each layer depends on the one below, so changing an early layer late (the margins after the contents, for example) moves every page number. The same setup works for a dissertation, a master's thesis or a long report.
Most of the formatting problems I fix in theses come from doing the steps in the wrong order. Someone builds the contents page, then changes the margins, and every page number moves. Or they number chapters by typing "Chapter 2" and later insert a new chapter. The order that avoids this rework:
- Page. Paper size, margins and any binding space. Changing them later reflows every page.
- Body text. Font, size, line spacing, paragraph spacing and indent, all in the Normal style.
- Headings. Heading 1, 2 and 3, styled once, numbered automatically if your guide numbers them.
- Other styles. Captions, block quotations, the reference list, text inside tables, unnumbered front-matter titles.
- Sections. Section breaks where the page numbering or orientation changes.
- Generated parts. Contents, lists of figures and tables, captions, cross-references. Word builds them from the layers above.
- Final pass. Update every field, check page breaks, accept tracked changes, make the PDF (saving a thesis as PDF).
Your university's formatting guide supplies the values: which font, how much spacing, where the page numbers go. This guide is about how to put those values into Word so they hold. If you want the values themselves checked item by item, my thesis formatting checklist lists them, and your university's guide always wins where the two differ.
Set up the page first
Check the paper size your guide asks for (A4 or US Letter) before anything else, then set the margins:
- Choose Layout › Margins › Custom Margins.
- Enter the top, bottom, left and right margins from your guide.
- If the bound copy needs extra space on the binding edge, type it in the Gutter box and, on Windows, set Gutter position to Left.
- For a thesis printed double-sided, choose Mirror margins under Multiple Pages: the left and right margins become Inside and Outside, and the gutter goes on the inside automatically. Click OK.
Do this before you add section breaks. Once a document has several sections, Word applies a new margin setting only to the current section. Word for the web can change only the top, bottom, left and right margins; add a gutter or mirror margins in the desktop app. More in margins in Word.
02Format with styles, not by hand
A style is a named set of formatting: font, size, spacing, indent, alignment, and how the paragraph behaves at a page break. When a chapter title has the Heading 1 style, Word knows it is a chapter title. It can list it in the contents, number it, keep it with the next paragraph and change it along with every other chapter title in one go.
Direct formatting (selecting text and clicking Bold, 14 pt, Centre) only changes how that one line looks. Word can't tell it from body text. On a long document that is where the trouble starts: three slightly different chapter titles, a contents page that misses half the sections, blank lines used to push a heading onto the next page.
Set up the Normal style first
Normal is the style of ordinary body text, and most other styles are based on it. Word stores a style as the differences from the style it is based on, so a change to Normal flows through to the styles built on it. That is why it comes first.
- On the Home tab, right-click Normal in the Styles gallery and choose Modify.
- In the Formatting section, set the font and size from your guide.
- For line spacing, spacing before and after, alignment and the first-line indent, click Format, then Paragraph.
- Leave New documents based on this template unselected, unless you want every new Word file to look like your thesis. Click OK.
Text pasted from articles, old drafts or a co-author's file often arrives with its own fonts and spacing as direct formatting. Select it and apply Normal (WindowsCtrl+Shift+N, MacCmd+Shift+N) to bring it back in line. The values that suit a thesis, and where APA and universities differ on them, are in my thesis formatting checklist; choosing a font is covered in fonts in Word and spacing in double spacing in Word.
03The styles a thesis needs
A thesis needs about a dozen styles, most of them built into Word: Normal, Heading 1 to 3, Caption, the TOC levels and a few you create yourself. Set each one up once and apply it everywhere it belongs:
- Normal: body text.
- Heading 1: chapter titles. Tick Page break before in its paragraph settings so every chapter starts on a new page without blank lines.
- Heading 2 and Heading 3: sections and subsections. If your guide uses APA headings, Heading 4 and 5 are there too; my guide to APA headings has the formatting for each level.
- An unnumbered title style for the abstract, acknowledgements and references, if your chapters are numbered. It should look like Heading 1 and still appear in the contents, but carry no number. A style based on Heading 1 can pick up Heading 1's chapter numbering once that is linked to a list, so check that the new style shows no number; multilevel lists in Word covers how to keep it unnumbered.
- Caption: the label and title of each table and figure. It appears in the Styles gallery once you insert your first caption.
- A block quotation style for long quotations, indented on the left.
- A reference list style with a hanging indent, explained in how to do a hanging indent in Word.
- A table text style, often single spaced with no first-line indent, so table cells don't inherit the body text's double spacing.
- TOC 1, TOC 2, TOC 3: the look of each level of the contents.
- Footnote Text, if your referencing style uses footnotes.
Create a new style
- Format one paragraph the way the style should look, for example a block quotation with a left indent.
- Right-click the text. On the mini toolbar, click Styles, then Create a Style.
- Type a name such as "Block quote" in the Create New Style from Formatting dialog and click OK. The style appears in the Styles gallery.
To change a style later from an example, format some text that has the style, then right-click the style in the gallery and choose Update Block quote to Match Selection (the command names the style). Every paragraph with that style changes. The Styles pane lists every style in the document and is quicker than the gallery for the less common ones: WindowsCtrl+Alt+Shift+S. A full tour of the gallery, the pane and style sets is in my guide to Word styles.
Keep headings with their text
A heading alone at the bottom of a page, with its text on the next, is a layout fault I see in almost every draft. Word prevents it with paragraph settings, not with blank lines:
- Right-click a heading and choose Paragraph, then open the Line and Page Breaks tab.
- Under Pagination, check that Keep with next is ticked. For Heading 1, also tick Page break before.
- Click OK. To set it for every heading at once, make the change inside Modify for the heading style (Format › Paragraph) rather than on one paragraph.
Widow/Orphan control, on by default, stops a single line of a paragraph being left alone at the top or bottom of a page. More on these settings, and on tables and figures that split across pages, in widow and orphan control in Word.
Doing this across a 200-page thesis?I can format the whole document for you
04Number chapters and sections automatically
APA 7's heading template for student papers says not to label headings with numbers or letters, but many universities want thesis chapters numbered 1, 2, 3 and sections 2.1, 2.1.1. Your university's guide decides. Typed numbers go wrong the first time you move or add a section. Linked to the heading styles, the numbers renumber themselves, and captions can pick up the chapter number (Figure 3.1).
- Make sure your titles use Word's built-in heading styles: Heading 1, Heading 2, Heading 3.
- Click in the first Heading 1 paragraph.
- On the Home tab, in the Paragraph group, choose Multilevel List.
- Under List Library, pick the numbering style whose preview shows "1 Heading 1" and "1.1 Heading 2", so chapters are numbered 1, 2, 3 and sections 1.1, 1.2, 1.3.
- Delete any numbers you typed by hand, so you don't end up with "2 2 Literature review".
Once the numbers are part of the heading styles, every new Heading 2 you apply is numbered in sequence. If the numbering ever restarts, skips a level, or stops following the heading styles, my guide to multilevel lists in Word takes the list apart level by level. Adding "Chapter" before the number, or numbering appendices A, B, C, is covered there and in appendices in Word.
05Sections and page numbers
A Word document can be split into sections, and each section can have its own page numbering, headers and footers, margins and orientation. A thesis usually needs at least two: the front matter with roman numerals (i, ii, iii) and the chapters starting again at 1. Every landscape page for a wide table needs a section of its own as well.
Insert a section break
- Click at the start of the page where the new section should begin, for example the Chapter 1 title.
- Choose Layout › Breaks and pick Next Page. If your thesis is printed double-sided and chapters must start on a right-hand page, pick Odd Page instead.
WebWord for the web can't add section breaks. Click Open in Word to add them in the desktop app; the file stays where it was saved. When to use each type of break, and how to remove one without wrecking the layout, is in how to insert a section break in Word and how to delete a section break.
Roman numerals, then arabic
- Double-click the footer of Chapter 1 and clear Link to Previous.
- In the front matter, insert the number with Page Number, then choose Page Number › Format Page Numbers and set Number format to i, ii, iii.
- In Chapter 1, insert the number, open Format Page Numbers again, choose 1, 2, 3 and set Start at to 1.
- Click Close Header and Footer.
- Open the footer of Chapter 1 and clear Link to Previous.
- In the front matter, choose Page Number › Page Number for the position, then Page Number › Format Page Numbers and set Number format to i, ii, iii.
- In Chapter 1, open Format Page Numbers again, choose 1, 2, 3 in Number format, set Start at to 1 and click OK.
- Click Close Header and Footer.
Headers and footers are linked separately, so clear Link to Previous in the one that holds the number. The full walk-through, with the title page left unnumbered, is in my thesis formatting checklist; the details are in roman numeral page numbers in Word, removing the page number from the first page and landscape pages in Word.
06Contents, captions and cross-references: let Word count
Anything in a thesis that counts or points (page numbers in the contents, "Table 4.2", "see Section 3.2") should be a field. A field is a placeholder that Word fills in and recalculates, such as a page number, a caption number or a cross-reference. Typed numbers are right on the day you type them and wrong after the next edit.
Table of contents
Once the headings have styles, click where the contents should go and choose References › Table of Contents, then an automatic style. On a Mac, pick one from Automatic Table of Contents. Avoid Manual Table: it isn't linked to your headings and never updates. Updating, levels, dot leaders and every common fault are in how to make a table of contents in Word.
Captions
- Select the table or figure and choose References › Insert Caption.
- Choose Table or Figure under Label, type the title after the number, and click OK.
- Change how all captions look by modifying the Caption style, never one caption at a time.
Captions inserted this way feed the list of figures and the list of tables. Chapter-based numbers, labels above or below, and APA's two-line captions are in how to insert a caption in Word.
Cross-references
- Type the lead-in text, such as "as shown in".
- Choose Insert › Cross-reference.
- Pick the Reference type (Heading, Figure, Table…), what to show under Insert reference to, and the item under For which.
- Tick Insert as hyperlink if readers should be able to click it, then click Insert.
More in cross-references in Word, and for equations, equation numbering in Word.
Update every field before you submit
Fields don't refresh on their own. Select the whole document and press F9: WindowsCtrl+A, then F9. MacCmd+A, then F9 (or Fn+F9 if F9 controls the volume or brightness). If the contents asks how to update, choose Update entire table.
Eighty figures and tables still numbered by hand?I can convert them for you
07Save the setup as a thesis template
Once the page, styles, numbering and sections are right, save an empty copy as a template. Each new chapter, paper or second thesis then starts with the same setup. If your university provides an official Word template, start from that instead and only add what it lacks.
- Delete the text but keep the headings you want as a skeleton.
- Choose File › Save As, double-click This PC, and type a name.
- In Save as type, select Word Template. Word opens the Custom Office Templates folder. Click Save.
- To use it: File › New › Personal, then select your template.
- Delete the text but keep the skeleton headings.
- On the File menu, choose Save as Template and type a name.
- Next to File Format, select Microsoft Word template (.dotx) and click Save.
- To use it: File › New from Template.
A template doesn't hold text you've already written. To move a draft into it, start a new document from the template and paste the chapters in with Merge Formatting or Keep Text Only (see below), then reapply the heading styles.
08Working habits for a long document
Four habits keep a long Word document in order while you write: paste with Merge Formatting or Keep Text Only so other documents' formatting stays out, keep formatting marks on, use the Navigation pane as a live outline of your headings, and keep the whole thesis in one file so the contents and cross-references work.
Paste without importing someone else's formatting
After you paste, click the Paste Options button that appears beside the text (on Windows you can also press Ctrl), and choose:
- Merge Formatting: the text takes the formatting of the paragraph you paste into, but keeps bold and italic applied to part of it. Usually the right choice for quotations and notes.
- Keep Text Only: removes all formatting and pictures, and turns tables into paragraphs.
- Avoid Keep Source Formatting for text from other documents. It brings the source's formatting and style definitions with it, which is how a thesis ends up with chapter titles in three different fonts.
WindowsTo change what a plain Ctrl+V does, go to File › Options › Advanced and, under Cut, copy, and paste, set Pasting from other programs and the related options.
Turn on formatting marks while you work
Click Show/Hide ¶ on the Home tab (WindowsCtrl+Shift+8). Paragraph marks, spaces, tabs, page breaks and section breaks become visible, as in Figure 1. Most layout mysteries, such as a blank page or a heading that won't move up, are explained by something you can only see this way. My guide to showing formatting marks in Word explains each symbol.
Use the Navigation pane as your outline
WindowsPress Ctrl+F or tick View › Navigation Pane, then click Headings. It lists every paragraph with a heading style, so a missing title tells you a heading style is missing. Drag a heading up or down to move the whole section with its text. Headings inside tables, text boxes, headers or footers don't appear there. More in the Word Navigation pane.
One file or one file per chapter?
I keep a thesis in one file. The contents, cross-references and caption numbers only work within one document. If you've written chapters in separate files, merge them before the final formatting pass: combining Word documents shows how without losing styles. Before submission, accept or reject all tracked changes (track changes in Word), because deleted text that is still shown takes up space and shifts page numbers.
09When the formatting goes wrong
These are the problems I see most often in theses that arrive for formatting, with the fix for each. Turn on formatting marks before you start.
A chapter starts halfway down the page, or after a blank page
The chapter was pushed down with empty paragraphs, or a page break and a section break sit together. Delete the empty paragraphs and extra breaks, then tick Page break before in the Heading 1 style, or use WindowsCtrl+Enter MacCmd+Return for a single page break. Stubborn blank pages are covered in deleting a blank page in Word.
Some headings look different from the rest
They carry direct formatting on top of the style. Select the heading and apply its style again from the gallery. To strip direct formatting from a passage, see clearing formatting in Word.
Changing a style changes things you didn't expect
Other styles are based on it. A change to Normal reaches every style built on Normal. Open Modify for the style that changed and look at which style it is based on. Word stores a style as its differences from that base, so setting a value to match the base doesn't uncouple it. If a style must not follow Normal, base it on another style, or on (no style), and then set its formatting.
"Link to Previous" is greyed out
There is no section break before this page, so there is nothing to link to. Insert Layout › Breaks › Next Page first.
Page numbers restart at 1 in every chapter
Each chapter starts with a section break and has Start at set to 1. In each chapter after the first, open Format Page Numbers and, under Page numbering, switch from Start at to the option that continues from the previous section. Only Chapter 1 should restart at 1.
Fields show codes like { PAGE } or "Error! Reference source not found."
Codes instead of numbers mean field codes are switched on: WindowsAlt+F9 MacOption+F9 switches them back. The error means the item the cross-reference points to is no longer in the document, usually because a caption or heading was deleted. Find it, insert the cross-reference again, and update all fields.
The heading numbers are wrong after copying text in
Pasted headings often bring numbering from their source document. Apply your Heading 1, 2 or 3 style to them again; if the numbering still jumps, the fixes are in multilevel lists in Word.
Still fighting it the week before submission?Send it to me and I'll fix the styles behind it
10Every guide in this series
The tasks above are covered one by one in this series. Grouped in the order you meet them when formatting a thesis in Word:
Page and text
- Margins in Word, including binding space
- Fonts in Word and the default font
- Double spacing in Word
- Word styles: the gallery, the pane and modifying styles
- Clearing formatting from pasted text
- Showing formatting marks
- Non-breaking spaces, so "Table 4" and "p. 37" never split
Structure and headings
- Title page in Word
- Multilevel lists for numbered headings
- APA headings, if your guide follows APA
- The Navigation pane
- Appendices in Word
Pages, sections and page numbers
- Inserting a section break and deleting one
- Adding a page, deleting a blank page and removing a page break
- Landscape pages in a portrait thesis
- Page numbers in Word, roman numerals and no number on the first page
- Headers and footers
- Line numbers, for drafts your supervisor annotates
- Widow and orphan control and keeping text together
Contents, captions and notes
- Table of contents in Word
- Captions, cross-references and equation numbers
- Footnotes and endnotes
- Hanging indent for the reference list
- An index and a table of authorities for law theses
Tables
- Tables in Word
- Merging cells and splitting a table
- Repeating the header row on every page
Working with the file
- Combining chapter files into one document
- Comparing two versions of a chapter
- Track changes, and turning it off for the final copy
- Word count, with and without notes and references
11Questions people ask
Is there an official thesis or dissertation format for Word?
No. Word has no thesis format of its own. Your university's formatting guide sets the values: margins, font, spacing, page order and numbering. Many universities also publish a Word template, which is the best place to start if yours does.
Can I format my thesis in Word for the web?
You can write in it and apply existing styles, but some essential tools are missing. Word for the web can't add section breaks, and it can only change the top, bottom, left and right margins, not a gutter. Do the setup in the desktop app on Windows or Mac.
Should I format as I write or at the end?
Set up the styles at the start and apply them as you write: it takes no longer than typing bold by hand. Leave the final pass (updating fields, checking page breaks, hiding comments) until the text is finished, because every edit moves the page breaks.
Does the same setup work on Windows and Mac?
Yes. Styles, sections and fields are stored in the .docx file, so a thesis set up on one opens correctly on the other. A template is a separate .dotx file, so copy it across if you want to start new documents from it on the other computer. Some menus differ: the Mac has File › Save as Template, and on a Mac you may need Fn with function keys such as F9.
My university's template keeps breaking. What do I do?
Usually text was pasted in with Keep Source Formatting, so formatting from another document came in with it. Paste with Merge Formatting or Keep Text Only, and reapply the template's own styles to the pasted headings and body text.
Sources
Steps checked against the Microsoft Support pages below for Word for Microsoft 365 on Windows and Mac, and the APA heading rule against APA's official template.
- Customize or create new styles Microsoft Support
- Doing it with Styles (archived 2004 blog by a Word for Mac developer) Microsoft Learn
- Number your headings Microsoft Support
- Change margins Microsoft Support
- Create custom margins Microsoft Support
- Set gutter margins Microsoft Support
- Set mirror margins for facing pages Microsoft Support
- Indent the first line of a paragraph Microsoft Support
- Use Line and Page Breaks settings in Word Microsoft Support
- Keep text together in Word Microsoft Support
- Insert a section break Microsoft Support
- Customize page numbers and their formats in different sections Microsoft Support
- Insert a table of contents Microsoft Support
- Update a table of contents Microsoft Support
- Add, format, or delete captions in Word Microsoft Support
- Create a cross-reference Microsoft Support
- Create or update a cross-reference Microsoft Support
- Create a template Microsoft Support
- Control the formatting when you paste text Microsoft Support
- Show or hide tab marks in Word Microsoft Support
- Use the Navigation pane in Word Microsoft Support
- Keyboard shortcuts in Word (Windows and macOS tabs) Microsoft Support
- Heading levels template: student paper (APA Style, 7th ed.) American Psychological Association