Word guide · Windows and Mac

How to repeat a header row in Word on every page

To repeat a header row in Word, select the table's first row (or first rows), then choose Table Layout › Repeat Header Rows. Word then prints those rows at the top of every page the table runs onto. If the header row doesn't repeat, the usual cause is a manual page break inside the table or the wrong view.

By André Antão Published 9 min read
The short answer
  1. Click in the table's first row. For two heading rows, select both: the selection must include row 1.
  2. Choose Table Layout › Repeat Header Rows (in the Data group).
  3. Check the result in View › Print Layout. Repeated headings don't show in other views.
  4. Still not repeating? Delete any manual page break inside the table and let Word break the page itself.

01Turn on Repeat Header Rows

Repeat Header Rows is a table setting in Word that prints the table's first row, or first few rows, again at the top of each new page the table runs onto. A header row is the row of column headings at the top of a table, such as "Item, M, SD". Microsoft Support (Repeat table header on subsequent pages) gives two ways to turn it on: the ribbon button and the Table Properties dialog.

Figure 1Table 4.3 of the sample thesis runs from page 56 onto page 57. Not set (left): page 57 opens with bare numbers, and the reader has to turn back to see which column is the mean (5.7) and which the standard deviation (1.0). With Repeat Header Rows (right): Word prints the heading row Item, M, SD (highlighted) again at the top of page 57. The table number and title stay on page 56 only.

Method 1: the ribbon button

  1. Select the header row. Click in it, or drag across it to select two or more heading rows. The selection must include the first row of the table.
  2. On the Table Layout tab, in the Data group, click Repeat Header Rows. The button stays highlighted while the setting is on for the row the cursor is in.

The Table Layout tab appears only while the cursor is in a table, next to Table Design.

Figure 2The Table Layout tab in Word for Windows (simplified), with the cursor in the table's first row. Repeat Header Rows sits in the Data group, on the right of the tab. Properties, in the Table group on the left (hidden in this drawing on narrow screens), opens the dialog for method 2.

Method 2: Table Properties

  1. Right-click in the row you want to repeat and choose Table Properties. You can also choose Table Layout › Properties.
  2. Click the Row tab.
  3. Tick Repeat as header row at the top of each page and click OK.
Figure 3The Row tab of Table Properties in Word for Windows (simplified), set for a thesis table's header row: Repeat as header row at the top of each page ticked, and Allow row to break across pages unticked so no row is split between two pages.

Both methods change the same setting, so a tick in one shows as a highlighted button in the other. Microsoft adds two rules worth knowing. You edit the header row only on the first page: the repeated copies on later pages are locked and follow every change you make there. And repeated headings are visible only in Print Layout view and on paper. In my tests they also appear in a PDF saved from Word.

While the Row tab is open, untick Allow row to break across pages for the whole table. Microsoft's reference for this option describes it as whether the text in a row may split across a page break. With it ticked, a long row can start at the foot of page 56 and finish under the repeated headings on page 57, which reads as two rows.

02Repeat two or more heading rows

Word repeats two or more heading rows only as one block that starts at row 1. A table with a spanner row (a heading that spans several columns, such as "Wave 1" over M and SD) and a row of column headings needs both rows selected before you click Repeat Header Rows. Microsoft Support states the rule: the selection must include the first row of the table.

I tested how the Repeat Header Rows button behaves in Word for Microsoft 365 on Windows, running the ribbon's own command from a script:

  • With no header rows set, the button was greyed out with the cursor in row 2 or row 3. It became available only in row 1.
  • With row 1 already set, clicking in row 2 and then the button added row 2 to the block. The button stays available only in row 1 and in the row just below the block.
  • Turning the setting off in row 2 left row 1 as the header row. Turning it off in row 1 cleared rows 1 and 2 together.
  • A row in the middle of a table can't be a header row on its own. To repeat a heading that isn't at the top, the table has to start there: split it with Table Layout › Split Table and set the header row on the new part.

Repeated rows sit at the top of every page, so keep them short. Two heading rows are normal in a thesis table. Four or five eat a third of every page and are better rewritten as a shorter heading plus a table note. How spanners and notes should look in APA style is in my guide to APA table format.

03Word for Mac and Word for the web

Word for Mac has the same Table Layout tab: Microsoft's Mac table pages give that name to the tab that appears when you click in a table. Microsoft's page on repeating table headers applies only to Windows desktop versions (Word for Microsoft 365, 2024, 2021, 2019 and 2016), and I had no Mac to test on. On a Mac, look for Repeat Header Rows on the Table Layout tab, or open Table Layout › Properties and use the Row tab, then check the PDF.

Where Repeat Header Rows is in each version of Word
VersionRibbon buttonTable Properties route
Windows (tested)Table Layout › Repeat Header Rows (Data group)Right-click › Table Properties › Row
Mac (not tested)Table Layout › Repeat Header RowsTable Layout › Properties › Row
WebNot documented by MicrosoftNot documented by Microsoft
Table 1Repeat Header Rows in Word for Windows, Word for Mac and Word for the web. Only the Windows routes are documented by Microsoft and tested here; for the Mac, Microsoft confirms the Table Layout tab name and the rest is assumed to match Windows. For the web, use the desktop app and check the PDF.

I couldn't find the option documented for Word for the web. Set it in the desktop app, then check the PDF you submit rather than the browser view.

04Header Row tick box vs Repeat Header Rows

The Header Row tick box under Table Design › Table Style Options does not repeat anything. It tells the table style to format the first row differently, for example in bold or with shading, and Microsoft's accessibility guidance uses it to give a table a header row that screen readers can announce. Repeat Header Rows, on the Table Layout tab, is the setting that prints the row again on each page.

The two settings have similar names and sit on neighbouring tabs, so they get mixed up. In my test, a 90-row table with only the Header Row box ticked showed its headings on page 1 and nowhere else. A long thesis table needs Repeat Header Rows. Tick Header Row as well if your table style should format the first row, or if accessibility matters for your submission.

Tip

My guide to APA table format covers which lines an APA 7 table uses, so keep the table style's formatting plain. The header row still repeats: Repeat Header Rows doesn't depend on the table style.

05Why is my header row not repeating?

A Word header row that won't repeat almost always has one of six causes: the wrong view, a manual page break inside the table, the whole table set as header rows, a selection that doesn't include row 1, a table split in two, or a table nested inside another table. Microsoft Support documents the first two; I reproduced the effect of a page break and the other four in Word for Microsoft 365 on Windows. Table 2 lists them with the fix; the details follow.

Why a header row doesn't repeat in Word, and the fix
What you seeCauseFix
No repeat on screen, fine on paperDraft, Web Layout or another viewView › Print Layout
Repeats until one page, then never againManual page break inside the tableDelete the break; to keep rows whole, untick Allow row to break across pages
No repeat anywhere, setting looks onEvery row set as a header rowSelect the table, turn the setting off, then set row 1 only
Button greyed outCursor not in row 1 (or the row just below the header rows)Click in row 1, or select from row 1 down
Repeats in the first part onlyTable split into two tablesSet the header row on the second table, or join them
Never repeatsTable nested inside another table or a layout cellMove the table out of the outer table
Table 2The six causes, each with what you see and the fix. The view and page-break rules are Microsoft's; I reproduced the page-break effect and the other four causes in Word for Microsoft 365 on Windows.

You're not in Print Layout view

Microsoft Support says repeated table headers are visible only in Print Layout view or when you print. In other views, such as Draft and Web Layout, the heading row appears only once, at the top of the table. Choose View › Print Layout before you decide the setting failed.

A manual page break inside the table

Word repeats header rows only after automatic page breaks, not after a page break you insert inside a table (Microsoft Support). My test showed the effect is bigger than it sounds. In a 90-row table over four pages, one manual page break at row 20 stopped the headings repeating on every page after it, including pages that began with an ordinary automatic break.

  1. Click Home › Show/Hide ¶ to see the hidden marks. A manual break shows as a dotted line labelled Page Break.
  2. Click just before it and press Delete.
  3. If you added the break to stop a row splitting, untick Allow row to break across pages on the Row tab of Table Properties instead.

The case I see most often in theses is a long table someone tidied by hand: a page break typed in to push a row onto the next page, or empty rows added for the same reason. Both stop working as soon as the text above the table changes, and the page break also stops the headings. More on the hidden marks is in my guide to formatting marks in Word.

The whole table is set as header rows

Selecting the whole table and clicking Repeat Header Rows makes every row a header row. In my test the table still ran over four pages, but no heading appeared on pages 2 to 4. Select the whole table, click Repeat Header Rows to turn it off, then click in row 1 alone and turn it on again.

The selection doesn't include row 1

Microsoft Support says the selection must include the first row of the table. In my test the Repeat Header Rows button was greyed out with the cursor in row 3 of a table with no header rows, so click in row 1, or select from row 1 down, and look again. The Table Layout tab itself appears only while the cursor is in a table. If the button is active but the table is nested inside another table (below), the setting has no effect.

The table was split in two

A table split with Table Layout › Split Table becomes two separate tables. In my test the second table started with no header row at all, so nothing repeated from that point. Either set the header row on the second table, or delete the empty paragraph between the two parts to join them. My guide to splitting a table in Word covers when a split is the right choice.

The table is nested inside another table

A table placed inside a cell of another table didn't repeat its header row in my test, even with the setting on. Some templates hold each table inside a one-cell layout table, to keep caption, table and note together. Cut the inner table, paste it outside the outer one, and delete the empty outer table.

What about text wrapping?

Many forum answers blame Text wrapping: Around on the Table tab of Table Properties. In my tests in Word for Microsoft 365 the heading row still repeated on a table set to wrap, including in the compatibility modes for older Word files, so wrapping is not the cause I would check first. A long thesis table has no reason to float beside text, though: set Text wrapping to None, which is what Word gives a new table.

Forty tables to check before the deadline?I can fix every one of them

06Long tables in a thesis: what the rules say

Universities set their own rules for tables that run onto a second page, and they differ. Repeat Header Rows repeats only the column headings: the table number and title stay above the first part of the table. Check your thesis guide for these points:

  • Whether the column headings must repeat, and whether a continuation label such as "Table 4.3 (continued)" goes above them.
  • Whether a table that would fit on one page may be split at all, or must start on a new page.
  • Whether a wide table goes on a landscape page, and where the page number sits on it. My guide to a landscape page in Word shows the section breaks this takes.

Word has no automatic "(continued)" label. If your guide asks for one, add it as the very last step, after the text is final: split the table where the page breaks, type the label above the second part, copy the heading row from the first part to the top of the second, and set that copied row as its header row with Repeat Header Rows. Any later change above the table moves the break, and the label then sits in the wrong place.

Continuation labels on every long table?I add them once the text is final

Repeated headings are one of many small table settings a thesis needs to look right on every page. Keeping a caption on the same page as its table is in my guide to Keep with next and Widow/Orphan control, and the rest of the long-document setup (styles, sections, page numbers, and the contents and list of tables) is mapped in how to format a thesis in Word. For the full list of what examiners check, see the thesis formatting checklist.

07Questions people ask

How do I repeat the first two rows of a table in Word?

Select both rows, starting with row 1, and choose Table Layout › Repeat Header Rows. Word repeats header rows only as a block that begins with the first row.

Can I repeat a row that isn't the first row?

No. A Word header row must start at row 1 of the table. Split the table so the row you want to repeat becomes the first row of the new table, then set it as a header row there.

Can I edit the repeated header on page 2?

No. Microsoft Support says the repeated header rows on later pages are locked. Edit the header row on the first page of the table and every repeat changes with it.

Does the repeated header row show in a PDF?

Yes. When I saved a long table as a PDF from Word for Microsoft 365, the header row appeared at the top of every page of the table, as it does in Print Layout view.

How do I stop a header row repeating?

Click in the first row and click Table Layout › Repeat Header Rows again to turn it off, or untick Repeat as header row at the top of each page on the Row tab of Table Properties.

How this was checked

Steps and labels come from the Microsoft Support and Microsoft Learn pages listed under Sources. I tested the header-row, split and nested-table causes in section 05, the effect of a manual page break, the button behaviour in section 02 and the PDF output in Word for Microsoft 365 on Windows 11 (version 16.0, build 16.0.20430), with a 90-row table over four pages. I had no Mac to test on. Microsoft's Mac table pages confirm only the Table Layout tab name, so the Mac steps assume the button and dialog match Windows. Rules for long tables vary by university, and your university's guide always wins.

André Antão is a university lecturer in Management and Marketing at the Polytechnic University of Portalegre and a PhD candidate in Management. He has formatted theses in Word and LaTeX for 8 years.

Sources

  1. Repeat table header on subsequent pages Microsoft Support
  2. Add or delete rows or columns in a table in Word or PowerPoint for Mac Microsoft Support
  3. Make your Word documents accessible to people with disabilities Microsoft Support
  4. Row.HeadingFormat property (Word) Microsoft Learn
  5. Row.AllowBreakAcrossPages property (Word) Microsoft Learn
  6. Rows.WrapAroundText property (Word) Microsoft Learn