Word guide · Windows and Mac

How to cross-reference in Word

To cross-reference in Word, type the words before the reference, such as "see", then choose Insert › Cross-reference, pick the Reference type (Table, Figure, Heading), what to show under Insert reference to and the item under For which, and click Insert. Word inserts a field that prints "Table 4.2" or "Section 3.2" and changes to the new number when you update fields with Ctrl+A, then F9.

By André Antão Published 13 min read
The short answer
  1. Give the item something to point at first: a caption from References › Insert Caption, or a heading in a Heading style.
  2. In your text, type the lead-in ("as shown in "), then choose Insert › Cross-reference.
  3. For a table or figure, choose Only label and number; for a section, Heading number (full context). Pick the item and click Insert.
  4. After any change, select the whole document and press F9, then do the same inside the footnotes and any text boxes (section 03).

01Insert a cross-reference

A cross-reference in Word is a field that prints the current number, text or page of another part of the same document: "Table 4.2", "Section 3.2", "page 41". Underneath, Word marks the target with a hidden bookmark and inserts a field that reads it (Microsoft Support, Create a cross-reference). That is why it can follow the target when tables and sections are added or moved, and why a typed "Table 4.2" can't.

Word can only point at things it recognises. Tables and figures need a real caption inserted with References › Insert Caption, not a typed one, and sections need a heading style such as Heading 1 or Heading 2. My guide to inserting captions in Word covers the captions themselves; this page starts once they exist.

Windows
  1. Type the words before the reference, for example "as shown in ", with the space.
  2. Choose Insert › Cross-reference. The same button is on the References tab, in the Captions group with Insert Caption.
  3. Under Reference type, choose Table, Figure, Heading or another type.
  4. Under Insert reference to, choose what to print (section 02).
  5. Under For which, select the item. Keep Insert as hyperlink ticked so readers can click through.
  6. Click Insert. The dialog stays open, so you can click in the text and insert the next one.
Mac
  1. Switch to View › Print Layout; Microsoft's Mac steps start there.
  2. Click where the reference goes, after a space.
  3. From the Insert menu in the menu bar, choose Cross-reference.
  4. Choose the Reference type and the Insert reference to option.
  5. Select the item in the For which box. Leave Insert as hyperlink ticked.
  6. Click Insert.
Figure 1The Cross-reference dialog in Word for Windows, set up for a table reference in Chapter 4 of a sample thesis. With Only label and number selected and Table 4.2 chosen, Word inserts "Table 4.2" as a clickable link.

The list under For which is built from what is in the document now, so create the caption or heading before the reference (Microsoft Support, Create a cross-reference). If the item you want isn't listed, section 05 has the four reasons I see most often.

02Which "Insert reference to" option prints what

The Insert reference to box decides what text lands in your sentence, and its choices change with the reference type. Table 1 shows what each option prints, as I checked it in Word, using a caption and a numbered heading from the sample thesis: "Table 4.2 Correlations between the study variables" and "3.2 Sample".

What each option inserts
Reference typeInsert reference toPrints
Table or FigureOnly label and numberTable 4.2
Entire captionTable 4.2 Correlations between the study variables
Only caption textCorrelations between the study variables
Page number57
Above/belowabove or below
HeadingHeading number (full context)3.2
Heading textSample
Heading number, Heading number (no context)3.2 for headings numbered 1, 1.1, 1.1.1
Page number41
Table 1What each Insert reference to option inserted in Word for Microsoft 365 on Windows. The options in bold are the ones a thesis needs most. The page numbers are examples: Word prints the page the item is on, and it changes as the text reflows.

Tables and figures: Only label and number

Only label and number gives "Table 4.2" or "Figure 3.1", which is what a sentence needs. Entire caption pulls the whole title into your sentence and is rarely what you want in running text.

Sections: Heading number (full context)

The three heading-number options differ in how much of the number they show. Microsoft's field documentation says the full-context version prints the number "in full context from anywhere in the document" (Microsoft Support, Field codes: Ref field). With thesis headings numbered 3, 3.1, 3.1.1, all three printed 3.2 in my test, but only the full-context one is guaranteed not to change if you later move the sentence into another section, so I always choose it. The headings must be numbered by Word, not typed: a heading without automatic numbering printed 0 in my test. My guide to numbered chapter headings in Word sets that up.

Combine two references in one sentence

Each cross-reference is a separate field, so "see Section 3.2 on page 41" is two of them:

  1. Type "see Section ", insert a Heading reference with Heading number (full context).
  2. Type " on page ", insert a second reference to the same heading with Page number.

Word can also print "above" or "below". In a thesis I avoid it: after the final layout pass a table that was below can end up on the next page, and "Table 4.2" is never wrong in the way "the table below" can be.

03Update every cross-reference

Cross-references change only when Word updates fields; they don't change as you type. In my test, after a new table was added before Table 4.2, every reference kept saying 4.2 until I updated fields, and then they all moved to 4.3 at once, as in Figure 2.

Figure 2The same paragraph after a new table was added early in Chapter 4 and a new section 3.2 was added to Chapter 3. Typed by hand: four numbers are now wrong and have to be found one by one. Cross-references: after selecting everything and pressing F9, all four point at the right table, section and page.

Update the main text

Windows
  1. Click in the body text and press Ctrl+A.
  2. Press F9, or right-click and choose Update Field (Microsoft Support, Update fields).
  3. If Word asks how to update the table of contents, choose Update entire table.
Mac
  1. In Print Layout view, press Cmd+A.
  2. Control-click the selection and choose Update Field (Microsoft Support, Create or update a cross-reference).
  3. Or press F9; if it changes the volume or brightness, press Fn+F9 (Microsoft Support, Keyboard shortcuts in Word).

Then the footnotes and text boxes

This is the step most guides leave out. Ctrl+A selects the main text only, and in my test a "see Table 4.2" inside a footnote still said 4.2 after the body had been updated. Footnotes, endnotes, text boxes, headers and footers are separate parts of the file, and each needs its own update:

  • Footnotes and endnotes: click inside any footnote, press Ctrl+A (Cmd+A) and press F9. Do the same in the endnotes.
  • Text boxes, headers and footers: click inside, select the text and press F9.

On Windows, File › Options › Display, then Update fields before printing under Printing options, makes Word refresh fields when it prints (Microsoft Support, Update fields). In my test, saving a PDF printed the new numbers even with that box cleared, while the Word file itself still showed the old ones. Don't rely on that: the .docx you send your supervisor would still be wrong. Update by hand, then save the PDF.

The same select-all and F9 refreshes the contents and the list of tables. My guide to the table of contents in Word covers those, and the full Word setup for a thesis shows where fields fit among styles, sections and page numbers.

See where your fields are

Fields show grey shading when you click them. To shade every field all the time, on Windows go to File › Options › Advanced and, under Show document content, set Field shading to Always (Microsoft Support, Update fields). Typed numbers then stand out because they have no shading. It doesn't print.

Hundreds of typed "see Table 4.2" in your draft?I can turn them into cross-references for you

04Lower case, plurals and "Chapter 3"

Word inserts the label exactly as the caption has it. Theses often need something slightly different, and a small switch added to the field code does it. A switch is an instruction after a backslash inside the field code, such as \* Lower. Every fix below was tested and survives updates; the one trap, chapter-numbered captions, has its own fix.

How to edit a field code

  1. Right-click the reference and choose Toggle Field Codes (Microsoft Support, Create a cross-reference). You see something like { REF _Ref244427837 \h }, where \h is the switch that makes it a link (Microsoft Support, Field codes: Ref field). On a Mac, click the reference and press Shift+F9.
  2. Click just before the closing brace and type the switch, with a space before it.
  3. Press F9 to update the field and show the result again.

Don't touch the _Ref number: it is the name of the hidden bookmark the reference points at.

Figure 3Two switches in the field codes, and what Word prints once the fields are updated. \* Lower turns "Table 2" into "table 2". \# 0 keeps only the number, so the sentence can say "Tables 1 and 3". Both were tested in Word for Microsoft 365 with tables numbered 1, 2, 3.

"table 4.2" in lower case

Add \* Lower: the code becomes { REF _Ref… \h \* Lower } and the reference prints "table 4.2", still updating. Use it only if your style or university wants the label in lower case mid-sentence; APA's own table label is "Table 1", with a capital (APA Style, Table setup).

"Tables 2 and 3" with plain numbers

Insert both references with Only label and number, then add \# 0 to each one that should show just the number. In my test, { REF _Ref… \h \# 0 } printed 1, and after a new table was inserted above, 2.

"Tables 4.1 and 4.2" with chapter numbers

The \# 0 trick breaks here: a number picture can't hold "4.2", and in my test it printed nonsense such as 0.4. Bookmark the number instead, as I do for equations:

  1. In the caption, select only the number, 4.2, without the word Table.
  2. Choose Insert › Bookmark, type a name such as tab_correlations (letters first, no spaces) and click Add.
  3. In the text, insert a cross-reference with Reference type Bookmark and Insert reference to Bookmark text.

In my test, "Tables 2.1 and 2.2" built this way became "Tables 2.2 and 2.3" when a table was added earlier in the chapter. The same bookmark method is the one my guide to equation numbering in Word uses for equation references.

Headings numbered "Chapter 3"

If your chapter headings are numbered "Chapter 1, Chapter 2", the word Chapter is part of the number, so a heading-number reference prints "Chapter 3" and "see Chapter " plus the reference gives "see Chapter Chapter 3". Either don't type the word, or add \t, which Microsoft describes as suppressing non-numerical text in a paragraph number when used with the \w, \r or \n switch (Microsoft Support, Field codes: Ref field). In my test, { REF _Ref… \w \h \t } printed 3.

05Cross-reference problems and fixes

These are the faults I find most often when a thesis arrives with broken references, each with its cause and the fix that works.

"Error! Reference source not found."

The item the reference pointed at is gone; the message can also read "Error! Bookmark not defined." (Microsoft Support, Create or update a cross-reference). In my test it appeared the moment I deleted a caption and updated fields. It also happens when a caption is retyped instead of edited. Find the item, insert the reference again from Insert › Cross-reference, and update. To find every broken one, search the document for Error! with Ctrl+F (Cmd+F) after updating.

The table or figure isn't in the list

  • The caption was typed. In my test, a paragraph reading "Table 9 A typed caption", even in the Caption style, never appeared under Table. Delete it and use References › Insert Caption.
  • The caption is in a floating text box. A Figure caption inside a text box was missing from the list in my test. Put the figure in line with text and the caption in an ordinary paragraph below it.
  • Wrong reference type. A caption made with a custom label, such as "Graph", is listed under that label, not under Figure.
  • The heading has no heading style. The Heading list shows paragraphs in Word's heading styles. Bold text that only looks like a heading isn't listed.

The reference picked up extra text

Pressing Enter at the start of a caption or heading can stretch its hidden bookmark over the new paragraph, as Microsoft warns (Microsoft Support, Create a cross-reference), so the reference shows more than intended. In my test the reference read "Inserted lineFigure 1". Press Ctrl+Z, then add the new line from the end of the paragraph before. If it's too late to undo, delete the reference and insert it again. To prevent it, add new paragraphs from the end of the previous one, never from the start of a caption.

It points at the wrong heading after I added one

Same cause: a new heading was created by pressing Enter at the start of the referenced heading, so the hidden bookmark now sits on the new one. Microsoft's fix, written for Word on Windows (Microsoft Learn, Cross-reference links do not update to correct heading number; on a Mac, use Option+F9 in place of Alt+F9):

  1. Click the broken reference and press Alt+F9. Note the bookmark name, which starts with _Ref, and press Alt+F9 again.
  2. Select the heading it should point at and choose Insert › Bookmark.
  3. Tick Hidden bookmarks, select that _Ref name and click Add. Then right-click the reference and choose Update Field.

The number won't change

Check three things in order. Fields haven't been updated in that part of the file (a footnote or text box, section 03). The number was typed: click it, and if there is no grey shading it isn't a field, so replace it. Or the field is locked: in my test a locked reference kept its old number through every update. Click it and press Ctrl+Shift+F11 on Windows or Cmd+Shift+F11 on a Mac to release it, the shortcut Microsoft lists for releasing a locked field (Microsoft Support, Keyboard shortcuts in Word).

The reference is bold, or loses my formatting

A reference copies formatting applied directly to the caption. In my test, a caption made bold by hand, as people often do for the bold "Table 1" label APA asks for, gave a bold reference, and when I removed the bold, the next update put it back. Formatting that comes from the Caption style itself did not carry over. The fix: add \* MERGEFORMAT to the field code (section 04 shows how), update, then remove the bold. In my test it then stayed plain.

You see { REF _Ref… \h } instead of a number

Word is showing field codes. Press Alt+F9 on Windows or Option+F9 on a Mac to switch every field back to its result (Microsoft Support, Keyboard shortcuts in Word).

References to another chapter file don't work

Cross-references only work within one document (Microsoft Support, Create a cross-reference). If each chapter is a separate file, references between them can't be made; Microsoft's answer is a master document, but my advice is to bring the chapters into one file before the final formatting, which also lets the contents and caption numbers run through the whole thesis.

Submission next week and "Error!" all over the PDF?Send me the file and I'll repair the references

06Questions people ask

Do Microsoft Word cross-references stay clickable in the PDF?

Yes, if Insert as hyperlink was ticked. In my test, a Word file saved as PDF with File › Save As kept every cross-reference as a link that jumps to the right page. In Word itself, hold Ctrl and click a reference to follow it on Windows.

Should I convert cross-references to plain text before submitting?

Not usually. Update them, check for "Error!", and save the PDF. If a department asks for a Word file with no fields, select the text and press Ctrl+Shift+F9 (Cmd+Shift+F9 on a Mac) to unlink the fields (Microsoft Support, Keyboard shortcuts in Word). Keep a copy first, because unlinked references never update again.

Can an MS Word cross-reference point to an appendix or an equation?

Yes. An appendix heading in a heading style is listed under Heading, and an appendix table caption under Table. Equations need a caption number or a bookmark, which my equation numbering guide covers step by step.

How this was checked

Every result on this page was tested in Word for Microsoft 365 on Windows 11 (version 16.0, build 16.0.20430) in a test document with numbered headings, captions with and without chapter numbers, footnotes and a text box: each Insert reference to option, updating with select-all and F9 in the body and in the footnotes, deleting a caption, pressing Enter at the start of a caption, locking a field, the \* Lower, \# 0, \t and \* MERGEFORMAT switches, the bookmark method, and saving as PDF. I had no Mac to test on; the Mac steps are Microsoft's own. The Word steps come from the Microsoft pages listed under Sources. Your university's thesis guide decides how references are worded.

André Antão is a university lecturer in Management and Marketing at the Polytechnic University of Portalegre and a PhD candidate in Management. He has formatted theses in Word and LaTeX for 8 years.

Sources

  1. Create a cross-reference Microsoft Support
  2. Create or update a cross-reference (Word for Mac) Microsoft Support
  3. Update fields Microsoft Support
  4. Field codes: Ref field Microsoft Support
  5. Add, format, or delete captions in Word Microsoft Support
  6. Keyboard shortcuts in Word Microsoft Support
  7. Cross-reference links do not update to correct heading number (archived) Microsoft Learn
  8. Table setup APA Style