How to add an appendix in a Word document
To add an appendix in a Word document, start it on a new page with Insert › Page Break, type the label (Appendix A) on its own line, and give that line a paragraph style with outline level 1 so the table of contents lists it. Then update the contents with References › Update Table. Page numbers, separate files and a reusable template are covered below.
- Click at the end of the last page before the appendices and choose Insert › Page Break (Ctrl+Enter on Windows, Cmd+Return on a Mac).
- Type Appendix A on the first line and the appendix title on the next. In APA Style the label is bold and centred, like other section labels; your university's guide decides the rest.
- Make the label a style that the contents can see: Heading 1 if your chapters aren't numbered automatically, or your own Appendix style with Outline level set to Level 1.
- Repeat for Appendix B, C and so on, then choose References › Update Table and Update entire table.
01Start each appendix on a new page
Each appendix in a Word document should start on a new page made with a page break, not with empty lines. A page break is a hidden mark that tells Word to start the next line on a new page, whatever happens to the text above it. APA Style 7th edition places appendices last, after the references, footnotes, tables and figures, and starts each main section on a new page (APA Style, Publication Manual formatting checklist).
- Click at the start of the appendix label.
- Choose Insert › Page Break, or press Ctrl+Enter.
- Click at the start of the appendix label.
- Choose Layout › Breaks › Page, or press Cmd+Return.
When you need a section break instead
A section break divides the document into parts that can have their own page numbering, orientation, headers and footers. A plain page break is enough for most appendices. Use a Next Page section break (Layout › Breaks › Next Page, the same on Windows and Mac) when an appendix needs one of these:
- Page numbers in a different form, such as A-1, A-2 (see section 05).
- A landscape page for a wide results table. My guide to turning one page landscape in Word has the steps.
- A header or footer that differs from the chapters, or a file brought in with its own header (see section 06).
The differences between the four kinds of section break are covered in my guide to section breaks in Word.
02Create an appendix heading style
An appendix heading in Word needs a paragraph style with an outline level, or the table of contents will skip it. A paragraph style is a named set of formatting that Word applies in one click, and an outline level is the setting that tells Word a paragraph is a heading of a given rank. Text that is only bold and centred looks like a heading but is ordinary body text to Word.
Which style to use depends on how your chapters are numbered:
- Chapters typed by hand or not numbered: give each appendix label Heading 1, the same style as the chapter titles, and type "Appendix A" yourself. Nothing else is needed.
- Chapters numbered automatically (1, 2, 3): don't use Heading 1. Word would number the first appendix as the next chapter, "6 Appendix A". Create a separate Appendix style with the steps below.
Make an Appendix style
- Type Appendix A on its own line. Format it the way your guide wants the label. In APA Style, section labels are bold and centred, in the same font and size as the body text.
- Open the Paragraph settings, set Outline level to Level 1 and click OK.
WindowsClick the small arrow in the corner of the Paragraph group on the Home tab.
MacChoose Format › Paragraph.
- With the cursor still in the label, create a new style from it.
WindowsRight-click the label, choose Styles on the mini toolbar, then Create a Style.
MacOn the Home tab, click Styles Pane, then New Style.
- Name it Appendix and click OK. The style now sits in the Styles gallery on the Home tab.
- Click in each of the other labels (Appendix B, Appendix C) and choose Appendix in the gallery.
Do the same for the title line, but leave its outline level at Body Text and call the style Appendix Title. If the title had outline level 1 too, the contents would show it as a second, separate entry. If your guide wants the title in the contents as well, type label and title on one line instead ("Appendix A: Survey Questionnaire") in the Appendix style. Or keep two lines by pressing Shift+Enter after the label instead of Enter: the line break keeps label and title in one paragraph, so the contents shows a single entry with both. Update the contents and check how that entry reads.
If the guide later asks for capitals or a larger size, right-click Appendix in the Styles gallery and choose Modify. Every label changes at once and stays in the contents.
APA 7's label and title rules, with a sample page, are in my guide to APA appendix format, and where appendices sit in a thesis is in my guide to thesis appendix format and order. Universities differ on capitals, on a colon between label and title, and on whether the title goes on the same line, so their guide decides.
03Put the appendices in the table of contents
Appendices appear in a Word table of contents once their label style has an outline level or a TOC level. Word's automatic contents lists Heading 1 to Heading 3, and, with Outline levels ticked in its Options, also paragraphs with outline level 1 to 3. So the Appendix style from section 02 shows up after one update: References › Update Table, then Update entire table and OK.
If you'd rather not touch the outline level, map the style directly. The TOC level is the number in Word's Table of Contents Options that decides at which level a style's paragraphs appear in the contents.
- Choose References › Table of Contents › Custom Table of Contents.
- Click Options.
- Under Styles, find Appendix in the list and type 1 in its TOC level box.
- Click OK, then OK again, and let Word replace the existing contents.
One entry per appendix, or one "Appendices" entry
Universities list appendices in the contents in one of two ways, and their guide says which. Both are easy in Word:
- Each appendix as its own entry (Figure 1): give the Appendix style TOC level 1.
- One "Appendices" entry with the appendices indented under it: put a line reading Appendices before Appendix A, give it Heading 1 (or an unnumbered style at level 1), and change the Appendix style's outline level to Level 2 (right-click Appendix in the Styles gallery, Modify, then Format › Paragraph), so the appendices sit indented under "Appendices" after an update. If you mapped the style in Options instead, set its TOC level there to 2. Some guides want that "Appendices" line on a page of its own; others want it above Appendix A.
A third pattern, a contents that shows only "Appendices" and nothing below it, comes from setting the Appendix style to Body Text and removing it from the Options list. Everything else about the contents, including fonts and dot leaders, is in my guide to making a table of contents in Word.
04Letter the appendices and refer to them
Appendix letters in Word can be typed by hand or numbered automatically. Typed letters (Appendix A, Appendix B) are fine for a thesis with three or four appendices that won't move. Automatic letters are worth setting up when the order may still change, because Word then reletters every label and every "see Appendix B" in the text for you.
Letter the labels automatically
WindowsMicrosoft documents these steps for Word for Windows; on a Mac the labels may differ slightly.
- Click in the first appendix label.
- On the Home tab, click the arrow next to Multilevel List and choose Define New Multilevel List.
- Click More in the lower-left corner to show every option.
- With level 1 selected, set the number style to A, B, C, …, type Appendix and a space before the letter in the number format box, and under Link level to style choose Appendix.
- Click OK, then delete the letters you typed by hand, so the labels don't read "Appendix A Appendix A".
An automatically numbered label keeps its number and its text in one paragraph. To keep the title on its own line, press Shift+Enter after the letter instead of Enter: the line break keeps label and title in one paragraph, so the contents shows one entry, "Appendix A Survey Questionnaire". If your guide wants only the label in the contents, keep typed letters and a separate Appendix Title line.
Refer to an appendix with a cross-reference
A cross-reference is a field that prints the current number or text of another part of the document and changes with it. Type the start of the sentence ("the full questionnaire is in "), then:
- Choose Insert › Cross-reference.
- Under Reference type, pick what you are linking to: Numbered item for automatic letters, or Heading if the labels use a built-in Heading style. For typed labels in your own Appendix style, bookmark each label first (Insert › Bookmark) and choose Bookmark.
- Set Insert reference to to the number or the heading text, pick the appendix under For which, and click Insert.
Cross-references don't change by themselves. Select the whole document and press F9 before you print or save the PDF (on a Mac, Fn+F9 if F9 changes the volume). More on fields that update themselves is in my guide to cross-references in Word, and table captions inside appendices (Table D1) are covered in captions in Word.
Appendices reordered and every "see Appendix C" now wrong?I can reletter and relink them
05Page numbers in the appendices
Appendix page numbers in Word normally continue from the last page of the references, with no extra setting: if the references end on page 108, Appendix A starts on page 109. Many university guides ask for this; check yours. A few ask for numbers such as A-1, A-2 in each appendix, which takes a section break before each appendix and a letter typed before the page number.
If the numbers restart at 1 by mistake
A section break before the appendices can carry its own starting number. To make the pages run on again:
- Double-click the footer (or header) of the first appendix page.
- Open Format Page Numbers: WindowsInsert › Page Number › Format Page Numbers. MacHeader & Footer › Page Number › Format Page Numbers.
- Under Page numbering, choose Continue from previous section and click OK.
Page numbers like A-1, A-2
Word's Include chapter number option reads the chapter number only from a built-in heading style, Heading 1 to Heading 9 (Microsoft Learn, PageNumbers.HeadingLevelForChapter), and that style must be used for nothing else. It can't take the letter from a custom Appendix style, so type the letter instead:
- Put a Next Page section break before each appendix (Layout › Breaks › Next Page).
- Double-click the footer of the first appendix page and turn off Link to Previous, so the change stays in this appendix.
- Click just before the page number and type A-.
- Open Format Page Numbers as above, choose Start at and 1, and click OK.
- Repeat in each appendix with B-, C- and so on, turning off Link to Previous each time.
In the theses I format, I always check A-1 numbering in the final PDF, page by page, because one appendix whose footer still has Link to Previous on, or that has no section break of its own, quietly carries on as B-7 instead of C-1. My guide to page numbers in Word covers headers, footers and Link to Previous in more depth.
06Add a PDF or a separate Word file as an appendix
A separate Word file goes into an appendix with Insert › Object › Text from File, and a PDF goes in with Insert › Object › Create from File. The first copies the text into your document so it can be edited and restyled. The second embeds the PDF as an object that can be resized but not edited (Microsoft Support, Add a PDF to your Office file).
Bring in a Word file
- Click where the appendix should start, under its label.
- On the Insert tab, click the arrow next to Object and choose Text from File.
- Find the file and double-click it.
If you want the file's header and footer as well, Microsoft advises inserting it in a new section, so that header and footer apply only to those pages. Microsoft documents this route for Word on Windows (Microsoft 365 and Word 2016 to 2024).
An inserted file brings its formatting with it. In the theses I format, the questionnaire appendix is the usual case: it was written in a survey tool or a separate document, and it arrives in another font with its own spacing, set by direct formatting rather than styles. After inserting it, select the inserted text, apply your body style, and reapply the Appendix and Appendix Title styles to its label and title.
Add a PDF, such as an ethics approval letter
WindowsMicrosoft documents these steps for Word for Windows.
- Click where the PDF should go.
- Choose Insert › Object, open Create from File, click Browse, choose the PDF, click Open (or Insert), then click OK.
Microsoft notes that viewing the embedded PDF needs Adobe Acrobat or Adobe Reader, and that Word for the web can't insert PDF objects. My recommendation for a thesis: for a one- or two-page letter, save each page as an image and insert it with Insert › Pictures, one page per page, with the appendix label above the first. The examiner then sees the page in the PDF of the thesis, not an icon or a frame that depends on another program.
Six appendices from six different files?I can merge and restyle them for you
07Make an appendix template in Word
An appendix template in Word is a document that already holds your Appendix and Appendix Title styles, the page breaks and the contents settings, saved as a Word template (.dotx). A template is a file Word uses as the starting point for new documents, so every new document made from it opens with the same styles. You build it once and reuse it for every thesis or report.
- Open the thesis in which the Appendix styles already work, or a copy of it.
- Delete the content but keep one appendix page with its label and title lines, and the table of contents.
- Save it as a template.
WindowsChoose File › Save As and set Save as type to Word Template. Word saves it in the Custom Office Templates folder.
MacChoose File › Save as Template and set File Format to Microsoft Word template (.dotx).
To copy the Appendix style into another existing document, copy one appendix label and paste it there; the style normally comes with it, so check that Appendix now shows in that document's Styles gallery. To have the style in every new document instead, right-click Appendix in the Styles gallery, choose Modify and select New documents based on this template. This changes Word's default template, so use it only if you want the style everywhere. A full thesis template, with chapter styles, front matter and page numbering, is the subject of my guide to the thesis template in Word, and the whole setup of a long document is in formatting a thesis in Word.
08Common problems and fixes
Most appendix problems in Word come from the label style: the wrong style, a style with no outline level, or a title line that carries one by accident. Go through the cases below, and update the entire table of contents after each fix.
The appendix shows as "6 Appendix A" in the contents
The label uses Heading 1, and Heading 1 is numbered automatically for the chapters. Create a separate Appendix style (section 02), apply it to every label, and update the contents.
The appendix is missing from the contents
The label has no outline level and no TOC level. Click in it, check that it uses the Appendix style, and set Outline level to Level 1 in the style (right-click the style, Modify, then Format › Paragraph). Or map the style in Custom Table of Contents › Options as in Figure 2.
The appendix title appears as a second line in the contents
The title line has an outline level, often because it was made by pressing Enter after the label, which keeps the label's style. Click in the title, apply the Appendix Title style, and check that its outline level is Body Text.
The page numbers restart at 1 in the appendices
A section break before the appendices has Start at 1 set. Open Format Page Numbers on the first appendix page and choose Continue from previous section, as in section 05.
Header or footer changes from an inserted file
Inserted text kept the other file's section settings. Check the section breaks around the inserted text, turn Link to Previous back on in the header or footer where the chapters' version should continue, or delete the extra section break.
"Error! Reference source not found." in the text
A cross-reference points to an appendix label that was deleted or retyped. Delete the cross-reference, insert it again from Insert › Cross-reference, then select the whole document and press F9.
Submission next week and the appendices still misbehave?I can sort out the appendices for you
09Questions people ask
How do I make one appendix page landscape?
Put a Next Page section break before and after that page, then change the orientation of that section only. The full steps are in my guide to turning one page landscape in Word.
Can one appendix have its own header?
Yes. Start the appendix with a Next Page section break, double-click its header, turn off Link to Previous and type the new header. Turn Link to Previous off again in the next section if the chapters' header should not follow it.
Do I need a separate "Appendices" title page?
APA's page order simply lists appendices last and doesn't ask for a divider page. Some universities do want an "Appendices" page before Appendix A; if yours does, give that line Heading 1 and set the Appendix style's outline level to Level 2, as in section 03.
Is there a ready-made appendix template for Word?
The reliable route is to make your own: set up the Appendix styles in your thesis and save a copy as a Word template (.dotx), as in section 07. Your university's own thesis template, if it has one, takes priority.
Can I put an Excel table in a Word appendix?
Yes. Paste the range into the appendix and give it a caption with References › Insert Caption, as described in my guide to captions in Word.
Word steps compared with Microsoft Support's pages for Word for Microsoft 365 on Windows and Mac, and the chapter-number limit with Microsoft Learn; where Microsoft documents a step for Windows only, I say so. APA page order and section labels from APA's Publication Manual formatting checklist. All pages are listed under Sources.
Sources
- Customize or create new styles Microsoft Support
- Format or customize a table of contents in Word Microsoft Support
- Table of Contents Options Microsoft Support
- Insert a page break in Word Microsoft Support
- Insert a section break Microsoft Support
- Define new bullets, numbers, and multilevel lists Microsoft Support
- Create a cross-reference Microsoft Support
- Format page numbers Microsoft Support
- Customize page numbers and their formats in different sections Microsoft Support
- Add different page numbers or number formats to different sections in Word for Mac Microsoft Support
- Link to previous Microsoft Support
- Insert a document in Word Microsoft Support
- Add a PDF to your Office file Microsoft Support
- Create a template Microsoft Support
- Create a new style Microsoft Support
- Update a table of contents Microsoft Support
- PageNumbers.HeadingLevelForChapter property (Word) Microsoft Learn
- Keyboard shortcuts in Word (Windows and macOS tabs) Microsoft Support
- Publication Manual formatting checklist APA Style