Word guide · Windows and Mac

Dissertation and thesis template for Word: build one that works

The best dissertation template is the one your university publishes, so check your graduate school or library pages first. If there isn't one, or it's broken, build your own in Word: set the margins, define the Normal and Heading styles, add a section break before Chapter 1 for the page numbers, insert an automatic contents page, and save the file as a Word Template (.dotx). Every new chapter then starts out formatted correctly.

By André Antão Published 15 min read
The short answer
  1. Look for your university's official Word template and its formatting guide. If one exists, use it and check it against the guide.
  2. To build your own, start a blank document and set the page under Layout › Margins › Custom Margins.
  3. Change the look of Normal, Heading 1, Heading 2 and Heading 3 by right-clicking each in the Styles gallery and choosing Modify.
  4. Put a Layout › Breaks › Next Page section break between the front matter and Chapter 1, so the front pages can use i, ii, iii.
  5. Save it with File › Save As and the type Word Template (Mac: File › Save as Template), then start the thesis from File › New.

01Start with your university's thesis template

Many universities publish a Word template for theses and dissertations, usually on the graduate school, doctoral school or library website, next to the formatting guide. Use it if it exists. Examiners and the library check your thesis against that guide, and the template is the shortest way to match it.

Before you write 80,000 words into it, spend ten minutes checking it. I've seen official templates that were years out of date, with margins that no longer matched the guide or a title page for a faculty that had since been renamed.

  • Is it current? Compare the margins, font, spacing and page order with the latest formatting guide. When the two disagree, the guide wins, and it is worth asking the graduate office which one they check against.
  • Is it mandatory? Some universities require their template. Others offer it as a convenience and accept any thesis that follows the guide.
  • Is it built on styles? Click in a chapter title and look at the Styles gallery on the Home tab. If it shows Heading 1 (or a named heading style), good. If it shows Normal with bold added by hand, the contents page can't find your chapters.
  • Is it a .dotx or a .docx? Either works. A .dotx opens a fresh copy each time; a .docx you simply copy, rename and write in.
  • Master's or doctoral? Some universities have a separate doctoral thesis template, with extra front pages such as a declaration or a list of publications.

A generic template from the internet was not built to your university's rules. It can still save time, but treat it as a starting point and check every setting against your guide, exactly as you would if you built the template yourself. My thesis formatting checklist lists what to check.

02What a good thesis template in Word contains

A template is more than a document with nice fonts. It is a set of rules that Word applies for you. A working thesis template has six parts:

  • Page setup: paper size, margins and, for bound copies, a gutter.
  • Styles: Normal for body text, Heading 1 to Heading 3 for chapters, sections and subsections, Caption for table and figure titles, and an unnumbered style for front-matter titles such as Abstract.
  • Heading numbers linked to the heading styles (1, 1.1, 1.1.1), if your university numbers headings.
  • Two sections at least: front matter numbered i, ii, iii, then the chapters starting again at 1.
  • An automatic contents page, plus lists of figures and tables if you need them.
  • Placeholder pages in the right order: title page, abstract, acknowledgements, contents, chapters, references, appendices.
Figure 1The two halves of a thesis template. Front matter (section 1) uses an unnumbered heading style and roman page numbers. After a Next Page section break, the chapters (section 2) use Heading 1 to 3 with automatic numbers, captions use the Caption style, and page numbers start again at 1.

Everything in Figure 1 is set once, in the template. When you write, you only pick a style: Heading 1 for a new chapter, Normal for a paragraph. That is why a good template saves so much time at the end, when the contents page, the page numbers and the captions have to be right.

03Build your own dissertation template in Word

Open a blank document in the Word desktop app and work through the steps in this order. Keep your university's formatting guide open beside it: every value below (margin widths, font, spacing, numbering) comes from that guide, not from me. Word for the web can't insert section breaks, so build the template in the desktop app.

Step 1: page size and margins

  1. Choose Layout › Margins › Custom Margins.
  2. Type the top, bottom, left and right margins from your guide.
  3. If the bound copy needs extra room on the binding side, type it in the Gutter box rather than widening the left margin. WindowsSet Gutter position to Left.

Widths vary a lot between universities, especially on the binding edge. My guide to thesis margins explains the common patterns.

Step 2: the Normal style (body text)

Almost every other style is based on Normal, so set it first. The simplest way is to format one sample paragraph and tell Word to copy it into the style.

  1. Type a sample paragraph. It has the Normal style already.
  2. Set the font and size from your guide on the Home tab.
  3. Click the small arrow in the corner of the Paragraph group (the dialog box launcher) and set the alignment, indentation, spacing before and after, and line spacing. Click OK.
  4. With the cursor still in the paragraph, right-click Normal in the Styles gallery and choose Update Normal to Match Selection.

You can also right-click Normal, choose Modify, and change the formatting in the dialog.

Which fonts and sizes universities accept is covered in my guide to thesis fonts.

Step 3: heading styles

  1. Type three sample headings, for example Introduction, Background and motivation and Research questions.
  2. Click in each and choose Heading 1, Heading 2 or Heading 3 in the Styles gallery.
  3. Format each sample heading the way your guide asks (font, size, bold or italic, alignment, spacing), then right-click its style in the gallery and choose Update Heading 1 to Match Selection (or Heading 2, Heading 3).
  4. To start every chapter on a new page, click in the Heading 1 sample, open the Paragraph dialog box launcher, select the Line and Page Breaks tab, select Page break before under Pagination and click OK. Then update Heading 1 to match again.

Always change a style, never the text. If you make one chapter title bigger by hand, Word won't copy that to the others, and the next chapter will look different. More on how styles inherit from each other is in my guide to Word styles.

Step 4: number the headings automatically

Skip this step if your university doesn't number headings. If it does, link the numbers to the heading styles so they renumber themselves when you move a section.

  1. Click in your first Heading 1.
  2. On the Home tab, in the Paragraph group, choose Multilevel List.
  3. Under List Library, choose a style whose preview shows the word Heading, so the numbers follow the heading styles.

For "Chapter 1" or a different format, choose Home › Multilevel List › Define New Multilevel List instead and click More. Select level 1, choose Heading 1 under Link level to style, and edit the Number format box. Repeat for level 2 with Heading 2 and level 3 with Heading 3, then click OK. These steps are for Word for Windows; on a Mac the list dialog looks different.

Figure 2The settings that matter in Define New Multilevel List (Word for Windows, simplified). Level 2 is linked to Heading 2, so every Heading 2 paragraph gets a number such as 1.1, and the count restarts after each chapter.

The full walk-through, including chapter-based numbering and how to repair a list that has gone wrong, is in my guide to numbered headings and multilevel lists in Word.

Step 5: front matter titles and the Caption style

Abstract, Acknowledgements and Contents shouldn't get a chapter number. Click in the Abstract title while it still has the Normal style (not a Heading style, or the new style inherits the chapter numbers), format it the way your guide wants, then right-click it, click Styles in the mini toolbar and choose Create a Style. Name it (I use Front Heading) and click OK.

The Caption style only appears in the Styles gallery after the document has at least one caption. Insert a sample: select a placeholder table or picture, choose References › Insert Caption, pick Table or Figure under Label and click OK. Then right-click Caption in the gallery, choose Modify, and set it once for every caption in the thesis. The captions guide covers chapter numbers in captions such as Table 3.2.

Step 6: sections and page numbers

Most universities number the front pages i, ii, iii and restart at 1 on the first page of Chapter 1. Word can only do that if the two parts are separate sections.

  1. Click at the end of the last front-matter paragraph, just above your Chapter 1 heading (in a new template, the end of the Abstract sample), and choose Layout › Breaks › Next Page. Don't click at the start of the Chapter 1 heading itself, or Word can leave an empty numbered heading behind.
  2. Double-click the footer (or header) on any front-matter page, choose Page Number, and pick a position and style. If the number appears only on the first page, clear Different First Page.
  3. Click in the footer (or header) on the first page of Chapter 1 and turn off Link to Previous. If it is greyed out, the section break is missing.
  4. Choose Page Number › Format Page Numbers, set Start at to 1 and click OK.
  5. Click in the front-matter footer, open Format Page Numbers again and choose i, ii, iii under Number format.
  6. Choose Close Header and Footer.

MacThe steps are the same, except that you insert the number with Page Number › Page Number, and headers and footers are linked separately: if the number is in the footer, turn off linking for the footer. To hide the number on the first page of a section, clear Show number on first page.

If your guide wants no number on the title page, or numbers in a different place on chapter openings, see my guides to roman numeral page numbers and thesis headers and footers.

Step 7: placeholder pages and the contents

  1. In the front matter, type each title in order (title page, Abstract, Acknowledgements, Contents) with a page break between them, and give each title your front heading style.
  2. On the Contents page, choose References › Table of Contents and pick an automatic table (on a Mac, a style from the Automatic Table of Contents part of the gallery).
  3. In section 2, add one placeholder heading per chapter (Introduction, Literature review, Methodology, Results, Discussion), then References and Appendices.
  4. Right-click the contents and choose Update Field to check that every chapter appears.

If the front titles don't appear in the contents, or appear with a chapter number, my guide to making a table of contents in Word shows how to control which styles it lists.

Would rather not build styles and sections from scratch?I can set the whole thesis up for you

04Save the thesis template as a .dotx file

A Microsoft Word thesis template has the extension .dotx. When you start a document from it, Word opens a new, untitled copy, so the template itself stays clean for the next time.

Windows
  1. Choose File › Save As and double-click This PC.
  2. Type a name in File name, for example thesis-template.
  3. In Save as type, choose Word Template.
  4. Click Save. Word saves it in the Custom Office Templates folder in Documents.
Mac
  1. Choose File › Save as Template.
  2. Type a name in the Save As box.
  3. Under File Format, choose Microsoft Word template (.dotx).
  4. Click Save. Unless you choose another folder in Where, Word saves it in its own Templates folder (the User templates location in Word › Preferences › Personal Settings › File Locations).
Figure 3Saving a thesis template in Word for Windows. The type is Word Template, and Word puts the file in the Custom Office Templates folder so it shows up under File › New.

Choose the macro-enabled type (.dotm) only if your template contains macros. A thesis template normally doesn't.

05Start a new thesis from the template

WindowsChoose File › New, click Personal (in some versions the tab is called Custom) and select your template. MacChoose File › New from Template and select it.

Word opens an untitled document with all your styles, sections and placeholder pages. Save it straight away as a normal .docx with a clear name, such as thesis-draft, and write in that file.

Edit the template later

If your guide changes or you find a mistake, fix it in the template, not only in the thesis.

  1. WindowsChoose File › Open, double-click This PC, and browse to Custom Office Templates under Documents.
  2. Select the template and click Open. This opens the .dotx itself, not a copy.
  3. Make the change, then save and close it.

A change to the template doesn't reach a thesis you have already started. In the thesis, make the same change to the style (right-click it, Modify).

One master file or one file per chapter?

I recommend one file for the whole thesis. Separate chapter files, each started from the same template, are easier on a slow computer, but you will have to join them at the end, and page numbers, cross-references and the contents only work properly in a single document.

06Move an existing draft into the template

Most people find their university's template after they have written half the thesis. The cleanest way in is to start a new document from the template and bring the text across in pieces, so the old document's formatting stays behind.

  1. Start a new document from the template (section 05) and save it as your new thesis file.
  2. In the old file, copy one chapter's body text. Leave out the title page and the old contents page: the template already has its own.
  3. Click in the new file where the chapter belongs and press Ctrl+V (Mac: Cmd+V).
  4. Click the Paste Options button that appears (or press Ctrl on Windows) and choose Merge Formatting, which drops most formatting added by hand, or Keep Text Only, which drops all of it.
  5. Reapply Heading 1, Heading 2 and Heading 3 to the titles from the Styles gallery, then move on to the next chapter.
Figure 4The Paste Options choices in Word for Windows (simplified; Word shows them as icons). Keep Source Formatting carries the old document's formatting into the template. Merge Formatting drops most of it. Keep Text Only drops all formatting, leaves out pictures and turns tables into plain paragraphs.
Keep Text Only drops pictures and flattens tables

It pastes plain text: pictures are left out and each table becomes a run of separate paragraphs. Bring tables and figures across separately, then caption them again with References › Insert Caption so they reach the list of tables and the list of figures.

WindowsTo make this the default, go to File › Options › Advanced and, under Cut, copy, and paste, change Pasting between documents and Pasting between documents when style definitions conflict.

Three hundred pages to move into the official template?Send me the draft and the template

07Template problems and fixes

These are the problems I see most often in theses that started from a template, official or home-made.

My template doesn't appear under File › New

Word lists only templates in its templates folder. WindowsMove the .dotx into Custom Office Templates under Documents. MacKeep it in the folder Word suggests in Save as Template; you can see or change that location under Word › Preferences › Personal Settings › File Locations (User templates). You can also just open a .docx template and save a copy under a new name.

I edited the template, but nothing changed in my thesis

That is expected: a document takes the template's settings when it is created. Make the same change to the style in your thesis file as well.

I changed my thesis, and the template is unchanged

Also expected, as long as you were working in the .docx. When you open the template from File › New, you get a copy. To edit the template itself, open it with File › Open as in section 05.

Pasted text came in with the wrong font or spacing

It was pasted with Keep Source Formatting, so it carries the old document's formatting. Select the text and paste it again with Merge Formatting or Keep Text Only, then reapply the heading styles.

Heading numbers skip, repeat or start at 1 in every chapter

The numbers aren't linked to the heading styles, or someone clicked the numbering button on a single heading. Click in a Heading 1, open Home › Multilevel List and choose the list style with Heading in its preview again, or, in Define New Multilevel List, choose the matching heading style under Link level to style for each level. Apply headings from the Styles gallery only.

Link to Previous is greyed out, or the roman numerals run into Chapter 1

There is no section break before Chapter 1, only a page break. Click at the end of the last front-matter page and insert one with Layout › Breaks › Next Page, then follow step 6 in section 03 again.

The Caption style is missing from the Styles gallery

Word adds it after the first caption is inserted. Insert one with References › Insert Caption and the style appears, ready to modify. Keep a sample caption in the template so the style is there in every thesis you start from it.

Every new document I create now has thesis formatting

The changes went into Word's Normal template (Normal.dotm) instead of your thesis template, which happens if you choose New documents based on this template in the Modify Style dialog while working in an ordinary blank document: Microsoft describes that option as the way to make a style available in all new documents. Undo the style changes there, or see the FAQ below.

08Questions people ask

Is there a free dissertation template for Word?

Your university's template is free, and it is the one to use if it exists. Generic templates online cost nothing either, but none of them was built to your university's guide, so you still have to check every setting. Building your own from the steps above takes an afternoon.

Is a PhD dissertation template different from a master's one?

The mechanics are the same: styles, sections, numbering and an automatic contents page. A doctoral thesis template usually adds front pages (a declaration, a list of publications or abbreviations) and has more chapters and appendices. Some universities publish separate templates for each degree, so check which one applies to you.

What's the difference between .dotx and .docx?

A .dotx is a Word template. Starting a document from it opens a new, untitled copy, so the template stays untouched. A .docx is an ordinary document. Many universities publish their template as a .docx: copy it, rename it and write in the copy.

Should I change Word's Normal template instead?

No. Normal.dotm is the template behind every new blank document, and changes to it apply to all documents you create from then on, not only the thesis. Keep the thesis settings in their own template. If Normal.dotm does get changed by mistake, rename or move the file with Word closed: Microsoft says Word then creates a new Normal.dotm with the original default settings the next time it starts. On Windows it is in C:\Users\user name\AppData\Roaming\Microsoft\Templates.

Can I use the template in Word for the web?

You can write in a document made from it, but build and edit the template in the desktop app. Word for the web can't add section breaks, which the page numbering depends on.

Can a template fix a thesis that's already badly formatted?

Only partly. Moving the text into a clean template (section 06) removes most of the old formatting, but headings, captions and cross-references still have to be applied again by hand. For a long thesis, that is where most of the time goes. My guide to formatting a thesis in Word covers the clean-up.

André Antão is a university lecturer in Management and Marketing at the Polytechnic University of Portalegre and a PhD candidate in Management. He has formatted theses in Word and LaTeX for 8 years.

How this was checked

Checked on . Every Word step was compared with the Microsoft Support pages listed under Sources, for Word for Microsoft 365 on Windows and on Mac. Where Microsoft documents a step only for Windows (the multilevel list dialog, the paste defaults), the guide says so.

Sources

  1. Create a template Microsoft Support
  2. Customize or create new styles Microsoft Support
  3. Use Line and Page Breaks settings in Word Microsoft Support
  4. Number your headings Microsoft Support
  5. Define new bullets, numbering, and multilevel lists Microsoft Support
  6. Insert a section break Microsoft Support
  7. Customize page numbers and their formats in different Word document sections Microsoft Support
  8. Set gutter margins Microsoft Support
  9. Insert a table of contents Microsoft Support
  10. Add, format, or delete captions in Word Microsoft Support
  11. Control the formatting when you paste text Microsoft Support
  12. Change the Normal template (Normal.dotm) Microsoft Support