Thesis font: which font and size to use
The right thesis font is the one your university's guide names, at the size it names. If the guide leaves it to you, 12-pt Times New Roman is the safest choice: APA, Chicago and MLA all accept it, it is widely available, and examiners are used to it. Whatever you pick, use one font for the whole thesis and set it once in Word's Normal style, not paragraph by paragraph.
- Look up the font rule in your university's thesis guide. It overrides any style manual.
- No rule? Use 12-pt Times New Roman, or another font your style accepts, such as APA's 11-pt Georgia, 11-pt Calibri or 11-pt Arial.
- In Word, right-click Normal in the Styles gallery, choose Modify, and set the font and size there.
- Check that headings, captions, footnotes and the reference list follow the same font, then save the final PDF with the fonts embedded.
01What the rules say: university first, then the style manual
Most thesis guides have a line such as "Times New Roman or Arial, 12 point, throughout". Some name a single font, some give a short list, and a few only ask for something "legible". Check the guide for your faculty and year, because the rule sometimes changes between editions. Where the guide is silent, the style manual your department uses fills the gap. This is what the main ones say:
- APA 7. Any legible font, used consistently. APA names 12-point Times New Roman, 11-point Georgia and 10-point Computer Modern (the LaTeX default) among serif fonts, and 12-point Aptos, 11-point Calibri, 11-point Arial and 10-point Lucida Sans Unicode among sans serif fonts. APA adds that the default font of your word-processing program is also fine. The details are in my APA font guide.
- MLA. "An easily readable typeface (Times New Roman is just one example) in which the regular type style contrasts clearly with the italic", at a standard size such as 12 points. This wording is from the MLA's handout for the 8th edition, so check your university's guide if you work to the 9th. The MLA Style Center says plainly, in an answer written for the 8th edition, that it doesn't require Times New Roman or any other font. More in my guide to MLA font, spacing and margins.
- Chicago and Turabian. Chicago's tip sheet for student papers asks for a widely available, legible font, such as 12-pt Times New Roman or Calibri, or 11-pt Arial. Chicago's Shop Talk blog, quoting Turabian's manual for theses, gives ten-point Arial or twelve-point Times New Roman. Both say your instructor's or dissertation office's rules come first.
So the sources agree on the principle and differ on the details: a common, readable font, one size for the text, and the university's word over everything else. Notice that none of them makes Times New Roman compulsory. When a supervisor insists on it, that is a local rule, and it is worth following.
| Style | Fonts named | Size | Footnotes |
|---|---|---|---|
| APA 7 | Times New Roman, Georgia, Computer Modern, Aptos, Calibri, Arial, Lucida Sans Unicode, or Word's default | 10 to 12 pt, depending on the font | Word's default settings |
| MLA | Any easily readable font with a clear italic | A standard size, such as 12 pt | Same size as the text (Style Center answer, 8th edition) |
| Chicago and Turabian | Times New Roman, Calibri, Arial | 12 pt Times New Roman or Calibri, 11 pt Arial (tip sheet); 10 pt Arial or 12 pt Times New Roman (Shop Talk) | Not covered in these sources |
Guides often say "11 or 12 point". Pick the size APA pairs with your font (12 for Times New Roman, 11 for Calibri, Arial or Georgia) and keep it for the whole thesis. A change of size between chapters is easy for an examiner to spot.
02The best font for a thesis when you can choose
When I format a thesis and the guide leaves the font open, I look at five things. A font that passes all five is a good thesis typeface, whatever its name.
- Your style manual lists it. Times New Roman, Georgia, Calibri, Arial and Aptos are on APA's list, so nobody can argue with them.
- It is on other people's computers. Your supervisor, the examiners and the repository all open your file. A font they don't have is replaced by another, and your page breaks move. APA chose its fonts partly because they are widely available.
- It has every character you need. Greek letters for statistics (α, β, χ²), maths symbols, and accented names in your references, such as Portuguese or Polish authors. APA notes that its listed fonts include maths and Greek characters.
- Its italic is clearly different from the roman. That is MLA's test, and it matters in a thesis full of italic book titles, statistics and Level 3 headings.
- It reads well over 200 pages. Decorative or condensed fonts tire the eye. Keep them for the cover, if your university allows a designed cover at all.
Serif or sans serif?
Both are accepted. Serif fonts such as Times New Roman and Georgia still dominate printed theses, and they are what many examiners expect. Sans serif fonts such as Calibri, Arial and Aptos are just as acceptable to APA and look modern on screen. If you can't decide, use 12-pt Times New Roman. In the university thesis guides I work from, it is the font named most often.
Figure 1 also explains a rule that surprises students: sizes are not equal across fonts. Chicago's tip sheet warns that some fonts appear larger than others at the same point size, and APA suggests a word count instead of a page count where possible, because fonts take up different amounts of space. If your thesis has a page limit, switching font to fit under it is easy for an examiner to spot. Ask whether the limit is in words.
Aptos replaced Calibri as the default font in new Microsoft 365 documents, so many theses now start in it without anyone choosing it. APA accepts it at 12 pt. It is a cloud font, though: Microsoft 365 downloads it when needed, and Microsoft suggests embedding fonts if you share files with people on older versions of Office. If your supervisor works in an older Word, embed the fonts or switch to a font every version has, such as Times New Roman or Calibri.
03Set the thesis font in Word, once
Selecting all the text and picking a font from the ribbon seems to work, but it doesn't last. The next heading you add, the next table, the next pasted paragraph comes in with the old font, because the styles behind them never changed. Set the font in the Normal style instead. The Normal style is the paragraph style Word gives ordinary body text, and most other styles in Word are based on Normal, so body text, lists and many others follow it.
Change the Normal style
- On the Home tab, in the Styles gallery, right-click Normal and choose Modify.
- Under Formatting, choose the font (for example Times New Roman) and the size (12).
- At the bottom, leave Only in this document selected if the font is for this thesis only. Choose New documents based on this template if you want every new file to start with it.
- Click OK. Every paragraph in Normal changes at once.
There is a second route that does the same thing through the Font dialog, and it works on a Mac too.
- Press Ctrl+D, or click the small arrow in the corner of the Font group on the Home tab.
- Choose the font and size.
- Click Set As Default, then choose This document only? or All documents based on the Normal template?, and click OK twice.
- Choose Format › Font › Font, or press Cmd+D.
- Choose the font and size.
- Click Default, then Yes, then OK.
Then check the styles that don't follow Normal
Changing Normal is not the end of it. The headings use a font of their own, and several other styles keep their own size, italics or colour even when they take the font from Normal. A template or pasted text can also give them a separate font. Theme fonts are the heading and body fonts of the document's theme; styles set to use them change when the theme does. In a new Word document the headings use the theme's heading font, so they stay in Aptos Display or Calibri Light after you set Normal to Times New Roman. Check each of these and change it the same way (right-click it in the gallery or the Styles pane, then Modify):
- Heading 1, 2 and 3: same font as the text in APA, with the levels marked by bold, italics and position. My guide to APA headings sets them up step by step.
- Caption: Word's default is small, italic and coloured. APA wants figure and table numbers and titles in the text font.
- Header and Footer: page numbers and running heads, covered in my guide to thesis headers and footers.
- TOC 1 to TOC 3: the lines of the table of contents.
- Footnote Text and Bibliography: see section 04 and the troubleshooting below.
WindowsTo switch every theme-based style in one go, choose Design › Fonts › Customize Fonts, set both Heading font and Body font to your thesis font, type a name and click Save. MacThe Design tab has the same Fonts gallery, but Microsoft says to create a custom font set in PowerPoint for Mac. Modifying each style is simpler.
A dozen styles to bring into line before the deadline?I can set them up for you
If you are starting from scratch, a template with the styles already set saves most of this work. See my guide to a thesis template in Word, and for styles in general, how Word styles work.
04Where a different font or size is allowed
"One font throughout" has three exceptions in APA 7: text inside figures, computer code and footnotes. Most universities accept them. Everything else, including captions, headings and the reference list, stays in the text font and size unless your guide says otherwise.
- Text inside figures. Labels and axis text in a chart or diagram use a sans serif font between 8 and 14 points. The figure number, title and note around it stay in the text font. More in my guide to APA figure format.
- Computer code. A monospace font, such as 10-point Lucida Console or 10-point Courier New, so characters line up.
- Footnotes. Word's default footnote settings are fine, even if they are smaller than the text, and you don't need to change them. An MLA Style Center answer written for the 8th edition takes the other view and keeps notes at the same standard size as the text, so check your guide.
Universities sometimes add exceptions of their own, such as tables in a smaller size (often 10 pt) so wide tables fit, long quotations in a smaller size, or a larger, bold title on the title page. If your guide allows something, apply it through the style (for example a Table Text style you create) rather than by hand, so it stays consistent across chapters. Anything your guide doesn't mention: keep it in the text font and size.
05Thesis typeface in LaTeX, Overleaf and Google Docs
In LaTeX the thesis typeface is set once in the preamble: the document class sets the size (10, 11 or 12 pt) and a font package or fontspec sets the font. In Google Docs it is set once in the Normal text style. Either way, the rule from Word holds: set the font in one place, never paragraph by paragraph.
LaTeX
LaTeX sets text in Computer Modern unless told otherwise, and APA accepts it at its normal 10-point size. The base size comes from the document class. Without an option it is 10pt; 11pt and 12pt are the usual alternatives:
\documentclass[12pt]{report}
If your university wants Times, there are two ways:
- With pdfLaTeX (Overleaf's default), load a Times-like font package:
\usepackage[T1]{fontenc}and\usepackage{mathptmx}. Overleaf also liststgtermes(TeX Gyre Termes), another Times clone. - With XeLaTeX or LuaLaTeX, use the real system font:
\usepackage{fontspec}and\setmainfont{Times New Roman}. Overleaf's list of fonts supported through fontspec includes Times New Roman, Georgia and Arial. It doesn't list Calibri; its list has Carlito instead.
To switch the compiler in Overleaf, open the settings (the gear icon in your project, or File › Settings), click Compiler, and choose XeLaTeX or LuaLaTeX from the Compiler menu. If your university has an official LaTeX class, use it before anything else: it usually sets the font for you. My guide to a LaTeX thesis template covers the rest of the set-up.
Google Docs
The idea is the same as in Word: change the style, not the text. Select a paragraph, set the font and size, then choose Format › Paragraph styles › Normal text › Update 'Normal text' to match. To start every new document with it, choose Format › Paragraph styles › Options › Save as my default styles. More in my guide to academic formatting in Google Docs.
06Font problems and how to fix them
Most thesis font problems come from formatting typed over styles: pasted text, styles that don't follow Normal, reference managers and missing fonts on another computer. These are the ones I meet most often in theses sent to me, roughly in order of how common they are.
Pasted paragraphs keep another font
Text pasted from articles, old drafts or a co-author's file brings its own formatting with it. Select the paragraph and press WindowsCtrl+Space to remove the manual character formatting, so it falls back to its style. If the paragraph has the wrong style altogether, apply Normal with Ctrl+Shift+N (MacCmd+Shift+N). Then use the paste option that keeps text only next time. My guide to clearing formatting in Word has more ways.
One font is scattered through 200 pages
Use Find and Replace on the formatting, not on words. WindowsChoose Home › Editing › Replace (Ctrl+H) and click More. In Find what, click Format › Font and pick the stray font. Click in Replace with, set your thesis font under Format › Font, and click Replace All. Microsoft's steps type a word in both boxes; I leave both text boxes empty, so Word changes only the formatting, wherever it appears. MacOpen View › Navigation Pane, click the magnifying glass, then the settings gear and Advanced Find & Replace, and use the Format menu in the same way.
Five drafts, five fonts, one deadline?Send it to me and I'll make it consistent
The default font keeps going back to Calibri or Aptos
You set a new default, and the next document opens in the old font again. Microsoft gives two causes. First, the template file Normal.dotm may be read-only: find it in File Explorer, right-click it, choose Properties, and on the General tab clear Read-only. On the Security tab, check that you have Write permission. On a work or university computer you may not have permission to change it; ask your IT support. Second, an add-in may reset the font. Turn add-ins off under File › Options › Add-ins, set the default again, then turn them back on.
The headings are in a different font from the text
Normal changed, the headings didn't. They have their own font setting, usually the theme's heading font. Modify Heading 1, 2 and 3 as in section 03, or change the theme fonts under Design › Fonts.
The reference list is in Times New Roman, and the text isn't
Reference managers insert the bibliography with a style of their own. With Zotero, the reference list uses the Bibliography style and the in-text citations use Normal. Click inside the reference list, modify the Bibliography style, and set your thesis font there. With EndNote, on the EndNote tab click the small arrow in the corner of the Bibliography group to open Configure Bibliography, go to the Layout tab and set Font and Size. Don't reformat the list by hand: both tools rewrite it when they refresh. See my guide to Zotero in Word.
The PDF or the examiner's copy shows a different font
When a computer doesn't have your font, it substitutes another, and lines, pages and the table of contents move. Two fixes:
- Send a PDF, not the .docx, whenever you can. WindowsChoose File › Save a Copy, pick PDF, then open More Options › Options. Tick ISO 19005-1 compliant (PDF/A) if your university asks for PDF/A, and leave Bitmap text when fonts may not be embedded ticked, so a font that can't be embedded is drawn as an image rather than replaced. See my guides to saving Word as PDF and embedding fonts in a PDF.
- Embed the fonts in the Word file if your supervisor needs the .docx. WindowsChoose File › Options › Save and tick Embed fonts in the file. Embedding all characters makes a bigger file but lets others edit with the same font. Not every font allows embedding; its maker sets that. On a Mac, Word for Microsoft 365 supports embedded fonts too, through Word's Preferences.
07Questions people ask
What is the best font for a thesis?
The one your university names. Without a rule, 12-pt Times New Roman is the safest choice. Georgia (11 pt), Calibri (11 pt), Arial (11 pt) and Aptos (12 pt) are good alternatives that APA accepts.
Should a thesis be in 11 or 12 point?
It depends on the font. APA lists 12 pt for Times New Roman and Aptos, and 11 pt for Calibri, Arial and Georgia. Chicago's tip sheet notes that some fonts appear larger than others at the same point size. If your guide says 12 pt for everything, follow the guide.
Do I have to use Times New Roman?
Only if your university or supervisor says so. APA, MLA and Chicago all accept other fonts, and the MLA Style Center says outright that it doesn't require Times New Roman.
Can I use a different font for headings?
Not in APA, which uses one font for the whole paper and marks heading levels with bold, italics and position. Some universities allow a different heading font or larger chapter titles. If yours doesn't say, keep headings in the text font.
Is Calibri acceptable for a thesis?
Yes, in APA at 11 pt, and Chicago's tip sheet names it too. Check that your university doesn't ask for a serif font, and if you work in LaTeX on Overleaf, note that Calibri isn't on Overleaf's list of supported fonts (it has Carlito instead).
What font size for footnotes, tables and captions?
Captions use the text font and size. In APA, footnotes may use Word's smaller default. Tables use the text font; many universities allow a smaller size inside tables, but only if the guide says so.
For the rest of the layout (margins, spacing, page numbers, headings and the order of pages), see the step-by-step guide to formatting a thesis in Word.
The style rules come from APA's Font page and Student Paper Setup Guide (7th edition), the MLA Style Center (its handout and answers were written for the 8th edition), and Chicago's Turabian tip sheet and Shop Talk blog. The Word steps were checked against Microsoft Support pages for Word for Microsoft 365 on Windows and Mac. The LaTeX steps follow Overleaf's documentation, and the reference manager fixes follow Zotero's and EndNote's own help pages. All are listed under Sources.
Sources
- Font APA Style
- Student Paper Setup Guide (7th edition) APA Style
- Formatting a Research Paper MLA Style Center
- Why does the MLA require the use of Times New Roman? MLA Style Center
- Should the font size for endnotes in a paper differ from the font size for the text of my essay? MLA Style Center
- Chicago-Style Paper Formats: Main Text (Turabian tip sheet) The Chicago Manual of Style
- How Do I Format the Main Text in Turabian/Chicago Style? CMOS Shop Talk
- Change the default font in Word Microsoft Support
- Customize or create new styles Microsoft Support
- Change a theme and make it the default in Word or Excel Microsoft Support
- Customize, save, and apply a theme in Word for Mac Microsoft Support
- Find and replace text in Word Microsoft Support
- Replace text Microsoft Support
- Keyboard shortcuts in Word Microsoft Support
- Benefits of embedding custom fonts Microsoft Support
- Cloud fonts in Office Microsoft Support
- Save or convert to PDF or XPS in Office desktop apps Microsoft Support
- Aptos Microsoft Learn
- Font typefaces Overleaf
- Creating a document in LaTeX Overleaf
- XeLaTeX Overleaf
- Which OTF or TTF fonts are supported via fontspec? Overleaf
- Selecting a TeX Live version and LaTeX compiler Overleaf
- Change how paragraphs & fonts look Google Docs Editors Help
- References appear in the wrong font in Word/LibreOffice Zotero
- Configuring the Bibliography in Word EndNote