List of abbreviations in a thesis: format, example and an automatic list
A list of abbreviations in a thesis is a page in the front matter, usually after the lists of tables and figures, that sets out every abbreviation you use in alphabetical order: the abbreviation on the left, its full form on the right, one per line, under a heading such as List of Abbreviations. It does not replace defining each abbreviation the first time it appears in the text, and your university's thesis guide decides whether you need one and where it goes.
- List the abbreviations you define in the text and use repeatedly. Leave out everyday ones (UK, PhD, e.g., etc.) and units with numbers (cm, kg).
- Sort them alphabetically by the abbreviation, not by the full form, and write each one exactly as it appears in the text.
- Set them in two aligned columns, with no dots, dashes or table borders between them, under a heading styled like your other front-matter headings.
- Put the page after the lists of tables and figures (unless your guide says otherwise), number it in roman numerals, and list it in the contents.
01What to include, and when you need a list
A list of abbreviations is for the reader who opens your thesis at Chapter 4 and meets "CB-SEM" or "HTMT" without having read Chapter 2, where you defined it. Most thesis guides make the list optional and recommend it once a thesis uses more than a handful of abbreviations. In a dissertation or thesis in management, health, engineering or law, that is almost always the case.
The test I use for each entry is simple: would an examiner from a neighbouring field need to look it up? If yes, it goes in. If every educated reader knows it, it stays out.
- Include: every abbreviation you define in the text and then use, such as methods (SEM, CFA), measures (AVE, NPS), field terms (eWOM, SaaS), organisations and laws you abbreviate (GDPR), and group authors you shorten in citations.
- Leave out: abbreviations that the dictionary lists as words, which APA says need no definition (IQ, for example); everyday ones such as UK, PhD and Ltd; Latin abbreviations (e.g., i.e., etc., et al.), which APA says are not defined at all; and units of measurement and time used with a number (12 cm, 30 min).
- Symbols: statistical and mathematical symbols (M, SD, β, α) usually go in a separate list of symbols, or the heading becomes "List of Abbreviations and Symbols". Science and engineering theses often call it a nomenclature. Your guide may name it.
- Not a glossary: a glossary explains what terms mean. A list of abbreviations only expands them. If your thesis needs both, they are two separate lists.
One honest caution from the theses I format: the list is often the last thing written, so it drifts from the text. An abbreviation in the list that the text never uses, or one used in Chapter 5 that is in neither the list nor the text's definitions, is the most common problem I find. Sections 06 and 08 show how to stop that happening.
02Where the list of abbreviations goes
The list of abbreviations belongs in the front matter, the pages before Chapter 1 that are numbered i, ii, iii. The most common place is straight after the lists of tables and figures. Some guides put it before them, straight after the contents, and a few allow it at the end of the thesis instead. APA Style has no rule for it, because APA's student paper has no front-matter lists, so the order comes from your university's guide. The full sequence of front pages is in my guide to thesis structure.
- New page: the list starts on a page of its own, like the contents and the other lists.
- Page number: it carries on the roman numerals of the front matter (vii, viii), not the arabic numbers of the chapters.
- Contents entry: most guides want it listed in the table of contents, at the same level as the list of figures. If you build the contents automatically, the heading must use a style the contents picks up, as my guide to the thesis table of contents explains.
03How to format a list of abbreviations
A list of abbreviations is formatted as two aligned columns: the abbreviation on the left, starting at the margin, and the full form on the right, all starting at the same point. These are the rules I apply when a guide says nothing more specific:
- Heading: "List of Abbreviations" (or "Abbreviations"), in the same style, size and position as "List of Tables" and "List of Figures".
- Order: alphabetical by the abbreviation. Ignore capitals when sorting, so eWOM sits among the E's, and put any entry that starts with a number (3D) first.
- Spelling: exactly as in the text: eWOM, not EWOM; SaaS, not SAAS. APA writes abbreviations without full stops (PhD, not Ph.D.), and the list should match.
- Full form: the singular (small and medium-sized enterprise, even if the text mostly says SMEs). Most theses capitalise the first word of each full form and, after that, only names (General Data Protection Regulation); lower case throughout is also fine if you keep to it.
- Alignment: one tab stop or one table column, never spaces. No dots, dashes, colons or equals signs between the columns, and no page numbers.
- Spacing: single spacing within an entry, with a little space between entries, unless your guide wants the whole front matter double spaced.
04List of abbreviations example for a thesis
Here is the full list for the fictional thesis I use in these guides, Brand trust and customer loyalty in subscription services, a quantitative study of 412 subscribers. It is the list I would hand in: 13 entries, each defined at its first use in the text and used at least three times.
| Abbreviation | Full form |
|---|---|
| AVE | Average variance extracted |
| CB-SEM | Covariance-based structural equation modelling |
| CFA | Confirmatory factor analysis |
| CLV | Customer lifetime value |
| CR | Composite reliability |
| eWOM | Electronic word of mouth |
| GDPR | General Data Protection Regulation |
| HTMT | Heterotrait–monotrait ratio |
| NPS | Net promoter score |
| PLS-SEM | Partial least squares structural equation modelling |
| SaaS | Software as a service |
| SEM | Structural equation modelling |
| SME | Small and medium-sized enterprise |
The decisions behind it are the ones you will face too:
- Order: it is the order Word's sort gives (section 07): capitals are ignored, so eWOM falls between CR and GDPR, and SaaS comes before SEM because "sa" sorts before "se".
- Left out: UK, PhD, e.g., i.e., et al., cm and min, for the reasons in section 01; M, SD, N and β, which went in a separate list of symbols; and "ANOVA", which the thesis used only once, so the text spells it out instead.
- Singular: the text says "SMEs" throughout, but the entry is SME, small and medium-sized enterprise. The plural needs no entry of its own: it is the abbreviation plus a lowercase "s" (section 05).
- Capitals: GDPR keeps its capitals because it is the name of a regulation. The other full forms only capitalise the first word.
05Abbreviations in the text: the rules the list relies on
A list of abbreviations is a help for the reader, not a substitute for defining abbreviations where they are used. Examiners check both. These are APA 7's rules, from APA Style's Abbreviations Guide and its page on defining abbreviations; most other styles and thesis guides agree on the essentials, and the APA basics are also summarised in my APA 7 format guide.
- Define on first use: write the full term, then the abbreviation in parentheses: customer lifetime value (CLV). Inside parentheses, use square brackets: (customer lifetime value [CLV]).
- Abstract and text separately: an abbreviation used in both is defined in the abstract and again at its first use in the text.
- Not in headings: don't define an abbreviation in a heading. Define it where the full term next appears in the text.
- Use it at least three times: APA's general rule. A term that appears once or twice is clearer spelled out, unless it is a long, familiar term with a standard abbreviation.
- Be consistent: once defined, use the abbreviation, not a mix of the abbreviation and the full term.
- Plurals: add a lowercase "s" with no apostrophe (SMEs). Units of measurement never take an "s".
- Tables and figures: APA tables and figures are meant to be understood on their own, so abbreviations in them are explained in the table or figure note, even if the text has already defined them.
Some thesis guides ask you to define each abbreviation again at its first use in every chapter, because chapters are often read on their own. Some want abbreviations kept to a minimum in titles and the abstract. Your guide wins over APA, and my thesis formatting checklist lists what to look up in it.
06Find every abbreviation in Word
Before you type the list, collect it from the text. Reading a 60,000-word thesis for capitals misses some. Word's wildcard search finds them for you, and two searches together catch the error examiners notice most: an abbreviation used but never defined.
Open the wildcard search
- Windows Home › Replace (Ctrl+H), click the Find tab, click More, and tick Use wildcards.
- Mac View › Navigation Pane, click the magnifying glass, click the settings gear, choose Advanced Find & Replace, and tick Use wildcards (click the down arrow first if you don't see it).
Search 1: every abbreviation you defined
Type this in Find what and click Find Next repeatedly:
\([A-Za-z0-9\-]{2,8}\)
It finds a bracketed word of two to eight letters, digits or hyphens with no space in it: (SEM), (eWOM), (SaaS), (PLS-SEM), but not (n = 412) or (see Table 2). It also stops at a year in a narrative citation, such as Smith (2019): skip those. Every other hit is a definition. Write down the abbreviation and the full term in front of it: that is your list, already in the words the text uses.
Search 2: every abbreviation you used
<[A-Z][A-Z0-9]{1,}
This finds any word that starts with a capital followed by at least one more capital or digit: SEM, HTMT, CO2, and the SME in SMEs. Compare the hits with the list from search 1. Anything that appears here but was never defined (HTMT, in the sample text I tested on) needs a definition at its first use, and then a line in the list. It skips mixed-case abbreviations such as eWOM and SaaS, which search 1 has already found.
On a computer whose regional settings use a semicolon as the list separator (most of continental Europe, for example), Word wants {2;8} and {1;} instead of {2,8} and {1,}. With the comma, my Word on such settings refused the pattern with "The Find What text contains a Pattern Match expression which is not valid". With the semicolon, it found every abbreviation.
07Lay out the list in Word
The simplest layout that stays aligned is a two-column table with no borders. A long full form wraps inside its own column instead of running back under the abbreviation, and Word sorts a table for you.
- Start a new page after the list of figures with Insert › Page Break (Ctrl+Enter on Windows, Cmd+Return on a Mac). Type the heading List of Abbreviations and give it the same style as your "List of Figures" heading, so the contents lists it.
- On the next line, choose Insert › Table and pick a grid two columns wide. Type each abbreviation in the left column and its full form in the right one; press Tab in the last cell to add a row.
- Click in the table, open Table Layout › Sort (the tab is called Layout in some versions), choose Column 1, Text and Ascending, select No header row (on a Mac, leave Header row unticked) and click OK.
- Select the whole table and choose Table Design › Borders › No Border. Any dotted gridlines you still see on screen don't print.
- Drag the line between the columns so the left one is just wider than your longest abbreviation (about 2.5 cm for PLS-SEM in 12-point type).
When I sorted the example list this way in Word for Microsoft 365, Word ignored capitals (eWOM went between CR and GDPR) and put entries starting with a digit before the letters, which is what most guides expect. To add an abbreviation later, add a row anywhere and sort again.
If your guide forbids tables in the front matter, use a hanging indent instead. Select the entries and open the Paragraph dialog: on Windows, the small arrow in the corner of the Paragraph group on the Home tab; on a Mac, Format › Paragraph. Set Special to Hanging by 2.5 cm, and press Tab once between each abbreviation and its full form. Word treats the hanging indent as a tab stop, so the full forms line up and wrap neatly. Sort with Home › Sort (the A–Z button).
Lists, front matter and roman numerals still fighting you?I can set the whole front matter up for you
08Build the list automatically in Word
Word has no "insert list of abbreviations" button, but its index feature can do the job. You mark each abbreviation once where you define it, and Word builds the list, sorts it and keeps it up to date. It suits long theses and theses still being rewritten, where a hand-typed list drifts. I tested every step below in Word for Microsoft 365 on Windows.
1. Mark each abbreviation once, at its definition
Click just after the definition, for example after structural equation modelling (SEM), press Ctrl+F9 (Cmd+F9 on a Mac) to insert an empty field, and type inside the braces:
XE "SEM" \t "Structural equation modelling"
XE marks an index entry, and the \t switch prints its text in place of a page number, so the entry becomes "SEM" followed by its full form. Repeat for every abbreviation, using search 1 from section 06 to jump from one definition to the next.
WindowsThe Mark Index Entry dialog does the same without typing codes: select the abbreviation, choose References › Mark Entry (Alt+Shift+X), choose Cross-reference, replace the word "See" with the full form, and click Mark. Never click Mark All: it marks every use of the abbreviation, and each duplicate shows up in the list (see section 10).
2. Insert the list
Click below the heading List of Abbreviations, press Ctrl+F9 (Cmd+F9), type the code below with one press of Tab between the two quotation marks, then press F9 to build it.
INDEX \e "⇥" \c "1" (where ⇥ is the tab you typed)
\e sets what goes between the abbreviation and its full form (a tab instead of Word's default comma), and \c "1" sets a single column. In my test the list came out sorted, with each abbreviation once, in the paragraph style Index 1.
3. Line up the full forms
Word re-applies the Index 1 style every time the list updates, so set the alignment in the style, not on the page. Click in one line of the list, give it a 2.5 cm hanging indent in the Paragraph dialog (as in section 07), then open the Styles pane: Ctrl+Alt+Shift+S on Windows, Home › Styles Pane on a Mac. Point at Index 1, open its menu and choose the command that updates it to match the selection (Update Index 1 to Match Selection on Windows). Every line takes the indent, and keeps it after each update.
4. Update it before you submit
Click in the list and press F9 (add Fn on a Mac if F9 does something else), or select the whole document and press F9 to update the contents and every list at once. A new abbreviation needs only its own XE field; Word slots it into place.
If the thesis also has a real index, keep the two apart: add \f "a" to every abbreviation's XE field and to the INDEX field of the list. Microsoft documents this switch for building separate indexes, and in my test the list then held only the abbreviations, and the index only the other entries.
09A list of abbreviations in LaTeX
LaTeX has two well-tested packages for this. Both also handle the first use for you: the first \ac{SEM} prints "structural equation modelling (SEM)", and every later one prints "SEM". My guide to a thesis in LaTeX covers the set-up around them.
The acronym package: simple, sorted by you
% preamble
\usepackage[printonlyused]{acronym}
% front matter
\chapter*{List of Abbreviations}
\addcontentsline{toc}{chapter}
{List of Abbreviations}
\begin{acronym}[PLS-SEM]
\acro{AVE}{average variance
extracted}
\acro{CFA}{confirmatory factor
analysis}
\acro{SEM}{structural equation
modelling}
\acro{SME}{small and medium-sized
enterprise}
\end{acronym}
% in the text
We estimated the model with \ac{SEM}.
Many \acp{SME} took part.
- Order: the package prints the entries in the order you type them, so type them alphabetically.
- Alignment: the optional argument,
[PLS-SEM], is your longest abbreviation; the package sets the column width from it. - Only what you use: with
printonlyused, an abbreviation you define but never cite with\acis left out of the list, which keeps the list honest. It needs a second compile to take effect. - Plurals and sentence starts:
\acp{SME}gives "small and medium-sized enterprises (SMEs)", and\Accapitalises the full form when the first use opens a sentence.
The glossaries package: sorted for you
% preamble
\usepackage[acronym,toc,nopostdot,
nonumberlist]{glossaries}
\makeglossaries
\newacronym{sem}{SEM}
{structural equation modelling}
\newacronym{cfa}{CFA}
{confirmatory factor analysis}
% front matter
\printglossary[type=\acronymtype,
title=List of Abbreviations]
% in the text
We used \gls{sem} after a \gls{cfa}.
glossaries sorts the list alphabetically and lists only the abbreviations you cite. Out of the box it adds a full stop after each full form and the page numbers where it is used; nopostdot and nonumberlist remove both, and toc adds the list to the contents. It needs an extra step, makeglossaries, between two LaTeX runs. Overleaf runs it for you; on your own computer, run pdflatex, makeglossaries, then pdflatex again. Use \Gls at the start of a sentence.
In both packages the list prints the full form exactly as you define it, and so does the first use in the text. Define it in lower case (unless it is a name), so it reads correctly mid-sentence; the list then has lower-case full forms, which most guides accept. If your university supplies a thesis class, check whether it already loads one of these packages before adding your own.
10Common problems and fixes
These are the problems I see in real theses and the ones I hit while testing the steps above.
"The Find What text contains a Pattern Match expression which is not valid"
Your regional settings use a semicolon as the list separator. Write {2;8} and {1;} instead of {2,8} and {1,}, as in section 06.
An entry reads "SEM Structural equation modelling, Structural equation modelling"
The abbreviation is marked more than once, usually after Mark All. Click Show/Hide ¶ on the Home tab to see the XE fields, search for XE "SEM", delete every one except the field at the definition, and update the list with F9. If two fields for one abbreviation have different full forms, the list shows both after a comma, as a second, slightly different definition on a later page did in my test: a sign the text defines the abbreviation two ways.
Codes like { XE "SEM" … } appear all over the text
Word turns on formatting marks when you mark entries. The fields are hidden text and don't print. Click Show/Hide ¶ on the Home tab to hide them again. If you see field codes instead of their results, press Alt+F9, or Option+F9 on a Mac.
The automatic list shows commas, page numbers or two columns
The INDEX field is missing its switches. Click in the list, press Shift+F9 to show its code, make it read INDEX \e "⇥" \c "1" with a real tab between the quotation marks, and press F9. Page numbers mean an XE field has no \t text.
The full forms don't line up, or wrap back under the abbreviation
The columns are aligned with spaces, or a long abbreviation pushes past the tab stop. Use a table or a hanging indent wider than the longest abbreviation (section 07). In an automatic list, set the indent in the Index 1 style, or the next update undoes it.
Table lines print around the list
The borders were never removed. Select the table and choose Table Design › Borders › No Border.
The list is missing from the table of contents
The heading is typed in Normal style with bold, so the contents can't see it. Give it the style your other front-matter headings use and update the contents. In LaTeX, add \addcontentsline (acronym) or the toc option (glossaries).
The LaTeX list is empty or missing entries
With the acronym package and printonlyused, compile twice; an abbreviation never cited with \ac stays out. With glossaries, the makeglossaries step hasn't run: on Overleaf, after adding new abbreviations, choose Clear cached files under the logs and recompile.
Abbreviations defined three different ways across six chapters?Send me the thesis and I'll make them consistent
11Questions people ask
Is a list of abbreviations mandatory in a dissertation?
A list of abbreviations is mandatory only if your university's guide says so. Most make it optional and recommend it when a thesis or dissertation uses many abbreviations, or abbreviations that readers outside your field won't know. If you use only two or three, spelling them out in the text is often the better choice.
Does the list of abbreviations go before or after the list of figures?
Most guides put the list of abbreviations after the lists of tables and figures. Some put it straight after the contents, before the other lists. Follow your guide, and keep the same order in the table of contents.
Do I still need to define abbreviations in the text if I have a list?
Yes. The list helps a reader who jumps into the middle of the thesis, but each abbreviation is still defined at its first use in the text, and in APA also in the abstract and in any table or figure note where it appears.
Is it a list of abbreviations or a list of acronyms?
An acronym is an abbreviation read as a word (NATO); an initialism is read letter by letter (SEM). A thesis normally puts both in one list headed "List of Abbreviations". Some guides use "List of Acronyms" or "Abbreviations and Acronyms": use the heading your guide gives.
Should the list include page numbers?
Usually not. A list of abbreviations gives the abbreviation and its full form only. A few guides ask for the page of first use; LaTeX's acronym package can add it with the withpage option, used together with printonlyused.
Rules on defining, using and pluralising abbreviations, units and Latin abbreviations from APA Style's Abbreviations Guide (7th edition), its pages on abbreviations, defining abbreviations and plural nouns, and, for table notes, its page on table setup. The two wildcard searches, the table sort order, the XE and INDEX fields (with \t, \e, \c and \f), the duplicate-entry problem, the Index 1 hanging indent and the semicolon list-separator error were tested in Word for Microsoft 365 (build 16.0.20430) on Windows 11 on 1 November 2026. Menu paths, shortcuts and switches from Microsoft Support, with the Mac paths and shortcuts taken from Microsoft's Mac instructions; I haven't tested the Mac steps myself. Both LaTeX examples were compiled in TeX Live 2025, and package behaviour checked against the acronym package manual, the glossaries package page and Overleaf. All pages are listed under Sources.
Sources
- Abbreviations Guide, 7th edition (PDF) APA Style
- Definition of abbreviations APA Style
- Abbreviations APA Style
- Plural nouns APA Style
- Table setup APA Style
- Find and replace text in Word Microsoft Support
- Sort the contents of a table Microsoft Support
- Remove borders from a table in Word for Mac Microsoft Support
- Add or remove table borders Microsoft Support
- Create and update an index Microsoft Support
- Field codes: XE (Index Entry) field Microsoft Support
- Field codes: Index field Microsoft Support
- Keyboard shortcuts in Word Microsoft Support
- acronym: expand acronyms at least once CTAN
- glossaries: create glossaries and lists of acronyms CTAN
- Glossaries Overleaf